Bedienungsanleitung Onkyo PR-SC5507 (Seite 151 von 156) (Englisch)

601414

151

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

151

Troubleshooting—Continued

• Make sure you’ve selected the correct remote control-

ler mode (pages 15 and 137 to 143).

• When using the remote controller to control other

manufacturers’ AV components, some buttons may

not work as expected.

• Make sure you’ve entered the correct remote control

code (page 135).

• Make sure to set the same ID on both the AV controller

and remote controller (page 107).

Can’t control other components

• If it’s an Onkyo component, make sure that the

cable and analog audio cable are connected properly.

Connecting only an cable won’t work (page 42).

• Make sure you’ve selected the correct remote control-

ler mode (pages 15 and 137 to 143).

• If you’ve connected an -capable Onkyo MD

recorder, CD recorder, RI Dock to the TV/TAPE IN/

OUT jacks, or an RI Dock to the GAME IN or VCR/

DVR IN jacks, for the remote controller to work prop-

erly, you must set the display to MD, CDR, or DOCK

(page 55).

If you cannot operate it, you will need to enter the

appropriate remote control code (page 135).

• To control another manufacturer’s component, point

the remote controller at that component.

• If none of the codes work, use the Learning function

to learn the commands of the other component’s

remote controller (page 146).

• With some AV components, certain buttons may not

work as expected, and some may not work at all.

• To control an Onkyo component that’s connected via

, point the remote controller at the AV controller.

Be sure to enter the appropriate remote control code

first (page 136).

• To control an Onkyo component that’s not connected

via , or another manufacturer’s component, point

the remote controller at the component. Be sure to

enter the appropriate remote control code first

(page 135).

• The entered remote control code may not be correct. If

more than one code is listed, try each one.

Can’t learn commands from another remote

controller

• When learning commands, make sure that the trans-

mitting ends of both remote controllers are pointing at

each other.

• Are you trying to learn from a remote controller that

cannot be used for learning? Some commands cannot

be learned, especially those that contain several

instructions.

There’s no sound

• Make sure your iPod is actually playing.

• Make sure your iPod is inserted properly in the Dock.

• Make sure the UP-A1 Dock is connected to the UNI-

VERSAL PORT jack on the AV controller.

• Make sure the AV controller is turned on, the correct

input source is selected, and the volume is turned up.

• Make sure the plugs are pushed in all the way.

• Try resetting your iPod.

There’s no video

• Make sure that your iPod’s TV OUT setting is set to

On.

• Make sure the correct input is selected on your TV or

the AV controller.

• Some versions of the iPod do not output video.

The AV controller’s remote controller doesn’t

control your iPod

• Make sure your iPod is properly inserted in the Dock.

If your iPod is in a case, it may not connect properly

to the Dock. Always remove your iPod from the case

before inserting it into the Dock.

• The iPod cannot be operated while it’s displaying the

Apple logo.

• Make sure you’ve selected the right remote mode.

• When you use the AV controller’s remote controller,

point it toward your amp.

• If you still can’t control your iPod, start playback by

pressing your iPod’s Play button. Remote operation

should then be possible.

• Try resetting your iPod.

• Depending on your iPod, some buttons may not work

as expected.

• You can’t control your iPod if the battery is extremely

low. Use the iPod after recharging for a while.

The AV controller unexpectedly selects your

iPod as the input source

• Always pause iPod playback before selecting a differ-

ent input source. If playback is not paused, the Direct

Change function may select your iPod as the input

source by mistake during the transition between

tracks.

Can’t record

• On your recorder, make sure the correct input is

selected.

• To prevent signal loops and damage to the AV control-

ler, input signals are not fed through to outputs with

the same name (e.g., TAPE IN to TAPE OUT or VCR/

DVR IN to VCR/DVR OUT).

• When the Pure Audio listening mode is selected,

recording is not possible because no video signals are

output. Select another listening mode.

Dock for iPod

Recording

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo PR-SC5507 Seite 151

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo PR-SC5507

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info