Bedienungsanleitung Onkyo TX-DS595 (Seite 13 von 52) (Englisch)

553752

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

If the device has a digital output jack as well, be sure to also connect

it to either a DIGITAL INPUT (COAXIAL) or DIGITAL INPUT

(OPTICAL) jack on the TX-DS595 depending on the type of

connector on the device.

With the initial settings of the TX-DS595, the VIDEO 1 input

source is set for digital input at the COAXIAL 2 jack.

If the digital connection is made at a different jack, this must be changed

at the setup menu: Input Setup → Audio Setup → Digital Input (see

page 29).

6. Connecting a satellite tuner, television, or settop box

(VIDEO 2/3)

If the device is equipped with an S video output terminal, connect it

to the S VIDEO 3 IN terminal with an S video cable. If it does not

have an S video output terminal, connect its video output terminal to

the VIDEO 3 IN terminal using an RCA-type video connection

cable. You do not need to connect to both the S VIDEO 3 IN and

VIDEO 3 IN terminals.

Using an RCA-type audio connection cable, connect the audio

output terminal on the satellite tuner or television to the same

VIDEO 3 IN audio jack on the TX-DS595. Make sure that you

properly connect the left channel to the L jack and the right channel

to the R jack.

If the device have a digital output jack as well, be sure to also

connect it to either a DIGITAL INPUT (COAXIAL) or DIGITAL

INPUT (OPTICAL) jack on the TX-DS595 depending on the type of

connector on the device.

With the initial settings of the TX-DS595, the VIDEO 3 input

source is set for digital input at the OPTICAL 2 jack.

If the digital connection is made at a jack different from the initial

settings, this must be changed at the setup menu: Input Setup →

Audio Setup → Digital Input (see page 29).

You can also connect the device to the VIDEO 2 IN input jacks on

the TX-DS595 just like you can to the VIDEO 3 IN input jacks.

With the initial settings of the TX-DS595, the VIDEO 2 input

source is set for no digital input.

If you connect the device to the DIGITAL Input terminal, then this

input source must be set for digital input at the setup menu: Input

Setup → Audio Setup → Digital Input (see page 29).

7. Connecting a television monitor or projector

(MONITOR OUT)

If the monitor or projector is equipped with an S video output

terminal, connect it to the MONITOR OUT S VIDEO terminal with

an S video cable. If it does not have an S video output terminal,

connect its video output terminal to the MONITOR OUT VIDEO

terminal using an RCA-type video connection cable. You do not

need to connect to both the MONITOR OUT S VIDEO and

MONITOR OUT VIDEO terminals.

Connections

Connect to devices with z terminals

The z terminal on the TX-DS595 is for connecting other Onkyo

components equipped with the same z terminal. When a

component are z-connected, you can point the remote controller

supplied with the TX-DS595 at the sensor on the TX-DS595 and

operate that component without having to switch remote controllers.

In addition, by connecting components to the z terminal, you can

also perform the system operations given below.

Power on/ready function

When the TX-DS595 is in the standby state, if an z-connected

component is turned on, then the TX-DS595 also turns on and the

input source selected at the TX-DS595 automatically switches to

that component.

If the power cord for an z-connected component is connected to

the AC OUTLET on the TX-DS595, or if the TX-DS595 is turned

on, this function will not work.

Direct change function

When the play button is pressed at an z-connected component, the

input source selected at the TX-DS595 automatically changes to that

component.

Power off function

When the TX-DS595 is placed in the standby state, all z-

connected components are also automatically put into the standby

state.

CAUTION

If an MD recorder is connected to the TAPE jack on the TX-DS595,

switch the Input Selector from TAPE to MD (see page 16).

REMOTE

CONTROL

TX-DS595

Ex: Onkyo CD player

z connector

Ex: Onkyo cassette tape deck

z connector

To connect components using the z terminal, simply connect a

remote control cable from this z terminal to the z terminal of the

other component. An z remote control cable with a 1/8-inch (3.5-

mm) miniature two-conductor plug comes with every cassette tape

deck, compact disc player, MD recorder, and DVD player that has an

z terminal.

• For remote control operation, the audio connection cables must

also be connected.

• The RC-447M remote controller does not support turntables.

• If a component has two z terminals, you can use either one to

connect to the TX-DS595. The other one can be used to daisy

chain with another component.

• With Onkyo DVD players, you can enter the pre-program code

so that you can operate the DVD player directly with the remote

controller without connecting the z terminals (see page 38).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-DS595 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-DS595

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info