Bedienungsanleitung Onkyo TX-NR3008 (Seite 67 von 116) (Englisch)

553767

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

Note

• This setting is not available when the multichannel analog input

is selected.

• To bypass the bass and treble tone circuits, select the Direct, Pure

Audio or THX listening mode.

Speaker Levels

You can adjust the volume of each speaker while listening

to an input source.

These temporary adjustments are cancelled when the AV

receiver is set to Standby. To save the setting you made

here, go to “Level Calibration” (➔ 53) before setting the

AV receiver to Standby.

■ Subwoofer 1

` –15.0dB to 0.0dB

to +12.0dB in 1 dB steps.

■ Subwoofer 2

` –15.0dB to 0.0dB

to +12.0dB in 1 dB steps.

■ Center

` –12.0dB to 0.0dB to +12.0dB in 1 dB steps.

Note

• You cannot use this function while the AV receiver is muted.

• Speakers that are set to “No” or “None” in the

“Speaker Configuration” (➔ 51) cannot be adjusted.

• This function will not work when the Pure Audio or Direct lis-

tening mode is selected to play analog audio.

• This setting cannot be used while a pair of headphones is con-

nected.

Audyssey Settings

■ Dynamic EQ

See “Dynamic EQ” of “Source Setup” (➔ 57).

■ Dynamic Volume

See “Dynamic Volume

”

of “Source Setup” (➔ 58).

Dolby Volume

■ Dolby Volume

See “Dolby Volume” of “Audio Adjust” (➔ 55).

Late Night

With the Late Night function, you can reduce the dynamic

range of Dolby Digital material so that you can still hear

quiet parts even when listening at low volume levels—

ideal for watching movies late at night when you don’t

want to disturb anyone.

■ Late Night

For Dolby Digital and Dolby Digital Plus sources, the

options are:

` Off

Late Night function off.

` Low:

Small reduction in dynamic range.

` High:

Large reduction in dynamic range.

For Dolby TrueHD sources, the options are:

` Auto

The Late Night function is set to “On” or “Off”

automatically.

` Off:

Late Night function off.

` On:

Late Night function on.

Note

• The effect of the Late Night function depends on the material

that you are playing and the intention of the original sound

designer, and with some material there will be little or no effect

when you select the different options.

• The Late Night function can be used only when the input source

is Dolby Digital, Dolby Digital Plus, or Dolby TrueHD.

• The Late Night function is set to “Off” when the AV receiver is

set to Standby. For Dolby TrueHD sources, it will be set to

“Auto”.

Music Optimizer

The Music Optimizer function enhances the sound quality

of compressed music files. Use it with music files that use

“lossy” compression, such as MP3.

■ Music Optimizer

` Off

Music Optimizer off.

` On:

Music Optimizer on. The M.Opt indicator will light

(➔ 9).

Note

• The Music Optimizer function only works with PCM digital

audio input signals with a sampling rate below 48 kHz and ana-

log audio input signals. The Music Optimizer is disabled when

the Direct or Pure Audio listening mode is selected.

• The setting is stored individually for each input selector.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR3008 Seite 67

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR3008

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info