Bedienungsanleitung Onkyo TX-NR3008 (Seite 68 von 116) (Englisch)

553767

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

Screen Centered Dialog

“Screen Ctr Dialog” is a function for moving the Center

image of dialog etc. upwards through use of the front high

speaker to fix the image to the display height.

■ Screen Ctr Dialog

As the value increases, the Center image moves upwards.

` 0

Screen Centered Dialog off.

` 1 to 5:

Screen Centered Dialog on.

Note

•The “Screen Ctr Dialog” can be used when supported listening

mode is selected and “Center” and “Front High” are set to

effective in “Speaker Configuration” (➔ 51).

• This setting cannot be used while a pair of headphones is con-

nected.

Re-EQ

With the Re-EQ function, you can compensate a

soundtrack whose high-frequency content is too harsh,

making it more suitable for home theater viewing.

■ Re-EQ

` Off

Re-EQ Function off.

` On:

Re-EQ Function on.

This function can be used with the following listening

modes: Dolby Digital, Dolby Digital Plus,

Dolby TrueHD, Multichannel, DTS, DTS-HD High Reso-

lution Audio, DTS-HD Master Audio, DTS Express,

DSD, Dolby EX, Dolby Pro Logic IIz Height, Dolby

PLIIx Movie, Neo:6 Cinema and 5.1-channel source +

Neo:6, and Neural Surround.

■ Re-EQ(THX)

` Off:

Re-EQ (THX) Function off.

` On

Re-EQ (THX) Function on.

This function can be used with the following listening

modes: THX Cinema, THX Surround EX, and

THX Ultra2 Cinema.

Note

• Settings for the Re-EQ function are kept in each listening mode.

However, in THX listening mode, when the AV receiver is

turned off, it will return to “On”.

• This setting cannot be used while a pair of headphones is con-

nected.

Audio Selector

You can set priorities of audio output when there are both

digital and analog inputs.

■ Audio Selector

` ARC:

The audio signal from your TV tuner can be sent to

the HDMI OUT MAIN of the AV receiver.

With this selection the TV’s audio can be automati-

cally selected as a priority among other assignments.

` HDMI:

This can be selected when HDMI IN has been

assigned as an input source. If both HDMI (HDMI

IN) and digital audio inputs (COAXIAL IN or OPTI-

CAL IN) have been assigned, HDMI input is auto-

matically selected as a priority.

` COAX:

This can be selected when COAXIAL IN has been

assigned as an input source. If both coaxial and

HDMI inputs have been assigned, coaxial input is

automatically selected as a priority.

` OPT:

This can be selected when OPTICAL IN has been

assigned as an input source. If both optical and

HDMI inputs have been assigned, optical input is

automatically selected as a priority.

` Multich:

The AV receiver always outputs analog signals from

multichannel analog input.

` Analog:

The AV receiver always outputs analog signals.

Note

• The setting is stored individually for each input selector.

• This setting can be made only for the input source that is

assigned as HDMI IN, COAXIAL IN, or OPTICAL IN.

• To select the digital audio input, see “Digital Audio Input” for

more detail (➔ 50).

• To select “Multich”, you must assign the multichannel

input(➔ 50).

You can select “ARC” if you select the TV/CD input selector.

But you cannot select it if you’ve selected “Off” in the “Audio

Return Channel” setting (➔ 65).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR3008 Seite 68

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR3008

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info