Bedienungsanleitung Onkyo TX-NR3010 (Seite 64 von 168) (Englisch)

492661

Zoom out

Zoom in

Vorherige Seite

1/168

Nächste Seite

Advanced Operations

En-64

You can specify the output resolution for HDMI OUT

MAIN and COMPONENT VIDEO MONITOR OUT so

that the AV receiver upconverts the picture resolution as

necessary to match the resolution supported by your TV.

Tip

• You can see the picture by pressing ENTER to check the

“Resolution” setting for HDMI OUT MAIN (excluding NET

input source).

Note

• Depending on the incoming video signal, the video playback may

not be smooth or the vertical resolution may be lowered. In this

case select anything other than “1080p/24”.

• With some TVs, there may be no picture when this setting is set

to “4K Upscaling”.

• If the “Monitor Out” setting is set to “Sub”, this setting is fixed

to “Through”.

• If the “Monitor Out” setting is set to “Both”, this setting is fixed

to “Auto”.

PC IN (Analog RGB input) signal is output at 480p

(480p/576p), 720p, 1080i resolution when the “Monitor Out”

setting is set to “Analog” (➔ page 63) and the “Resolution”

setting is set to “Through”.

These settings are not available when the “Monitor Out”

setting is set to “Analog” (➔ page 63).

HDMI Input

If you connect a video component to an HDMI input, you

must assign that input to an input selector. For example, if

you connect your Blu-ray Disc/DVD player to HDMI IN 2,

you must assign “HDMI2” to the “BD/DVD” input

selector.

If you’ve connected your TV to the AV receiver with an

HDMI cable, composite video and component video

sources can be upconverted

and output by the HDMI

output

. You can set this for each input selector by

selecting the “-----” option. See “Video Connection

Formats” for more information on video signal flow and

upconversion (➔ page 111).

This applies only when “Monitor Out” setting is set to other

than “Analog” (➔ page 63).

Here are the default assignments.

If you connect your personal computer to PC IN (Analog

RGB), you must assign “-----” to the “PC” input selector.

■ BD/DVD, CBL/SAT, STB/DVR, GAME1, GAME2,

PC, TV/CD, PHONO

` HDMI1, HDMI2, HDMI3, HDMI4, HDMI5,

HDMI6, HDMI7, HDMI8:

Select the input to which the component has been

connected.

` -----:

Output composite video and component video

sources from the HDMI output. The video output

signal from the HDMI output is the one configured in

“Component Video Input”.

Each HDMI input cannot be assigned to two input selectors

or more. When HDMI1 - HDMI8 have already been

assigned, you must first set any unused input selectors to

“-----” or you will be unable to assign HDMI1 - HDMI8

to other input selectors.

Note

• For composite video and component video upconversion for the

HDMI output, the “Monitor Out” setting must be set to other

than “Analog” (➔ page 63), and the “HDMI Input” setting

must be set to “-----”. See “Connection Tips and Video Signal

Path” for more information on video signal flow and

upconversion (➔ page 111).

• The assignment of input selector selected for Zone 2 cannot be

changed when the “Zone 2 HDMI” is set to “Use” (➔ page 63).

• If no video component is connected to the HDMI input (even if

the HDMI input is assigned), the AV receiver selects the video

source based on the setting of “Component Video Input”.

• When an HDMI IN is assigned to an input selector as explained

here, the same HDMI IN will be set as a priority in the “Digital

Audio Input” (➔ page 65). In this case, if you want to use the

coaxial or optical audio input, make the appropriate selection in

the “Audio Selector” setting (➔ page 80).

• Do not assign an HDMI IN to the TV/CD selector while “HDMI

Control(RIHD)” is set to “On” (➔ page 83), otherwise

appropriate CEC (Consumer Electronics Control) operation will

not be guaranteed.

• If you assign “-----” to an input selector that is currently

selected in “HDMI Through” (➔ page 84), the “HDMI

Through” setting will be automatically switched to “Off”.

•“AUX” is used only for input from the front panel.

Input selector Default assignment

BD/DVD HDMI1

CBL/SAT HDMI2

STB/DVR HDMI3

GAME1 HDMI4

GAME2 HDMI5

HDMI6

AUX FRONT (Fixed)

TV/CD -----

PHONO -----

OUT

Composite video,

component video

HDMI

Composite video,

component video

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR3010 Seite 64

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR3010

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info