Bedienungsanleitung Onkyo TX-NR414 (Seite 45 von 128) (Englisch)

492644

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

Advanced Operations

En-45

Note

• For a more accurate setting, look up the frequency response in the

manuals supplied with your speakers and set accordingly.

• Choose a higher crossover frequency if you want more sound

from your subwoofer.

■ Double Bass

` On

` Off

Turn this setting on to boost bass output by feeding bass

sounds from the front left, right, and center channels to

the subwoofer.

Note

•When the “Subwoofer” setting is set to “No” or the “Front”

setting to “Small”, this setting is fixed to “Off” (➔ page 44).

• This setting is set to “On” automatically when the “Subwoofer”

and “Front” settings are set for the first time to “Yes” and

“Large” respectively.

Menu Sp Distance

Here you can specify the distance from each speaker to the

listening position so that the sound from each speaker

arrives at the listener’s ears as the sound designer intended.

Note

• These settings are not available in either of the following cases:

– A pair of headphones is connected.

–The “Audio TV Out” setting is set to “On” (➔ page 49).

–“HDMI Ctrl (RIHD)” is set to “On” (➔ page 49) and you’re

listening through your TV speakers.

■ Unit

` feet:

Distances can be set in feet. Range: 1ft to 30ft in

1 foot steps.

` meters:

Distances can be set in meters. Range: 0.3m to 9.0m

in 0.3 meter steps.

(The default setting varies from country to country.)

■ Left, Center, Right, Surround Right, Surround

Left, Subwoofer

` Specify the distance from each speaker to your

listening position.

Note

• Speakers that you set to “No” or “None” in the “Sp Config

(Speaker Configuration)” (➔ page 44) cannot be selected.

Menu Level Cal

Here you can adjust the level of each speaker with the

built-in test tone so that the volume of each speaker is the

same at the listening position.

Note

• These settings cannot be calibrated in either of the following

cases:

– A pair of headphones is connected.

–The “Audio TV Out” setting is set to “On” (➔ page 49).

–“HDMI Ctrl (RIHD)” is set to “On” (➔ page 49) and you’re

listening through your TV speakers.

– The AV receiver is muted.

■ Left, Center

, Right, Surround Right, Surround

Left

` –12 dB to 0dB

to +12 dB in 1 dB steps.

■ Subwoofer

` –15 dB to 0dB to +12 dB in 1 dB steps.

Note

• Speakers that you set to “No” or “None” in “Sp Config (Speaker

Configuration)” (➔ page 44) cannot be selected.

For the center speaker and subwoofer, the level settings made

by using the Quick Setup are saved in this menu (➔ page 40).

Tip

• If you’re using a handheld sound level meter, adjust the level of

each speaker so that it reads 75 dB SPL at the listening position,

measured with C-weighting and slow reading.

Sp Distance (Speaker Distance)

1 2 3 4 5

“Setup”

Level Cal (Level Calibration)

1 2 3 4 5

“Setup”

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR414 Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR414

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info