Bedienungsanleitung Onkyo TX-NR5007 (Seite 32 von 164) (Englisch)

553765

Zoom out

Zoom in

Vorherige Seite

1/164

Nächste Seite

Connecting the AV receiver—Continued

By connecting both the audio and video outputs of your DVD/BD player and other AV components to the AV receiver,

you can select both the audio and video simultaneously simply by selecting the appropriate input source on the AV

receiver.

The AV receiver supports several connection formats for compatibility with a wide range of AV equipment. The format

you choose will depend on the formats supported by your other components. Use the following sections as a guide.

Video Connection Formats

Video equipment can be connected to the AV receiver by using any one of the following video connection formats:

composite video, S-Video, component video, or HDMI, the latter offering the best picture quality.

The AV receiver can upconvert and downconvert between video formats, depending on the “Monitor Out” setting, which

generally determines whether video signals are upconverted for the component video output or the HDMI output.

For optimal video performance, THX recommends that video signals pass through the system without upconver-

sion (e.g., component video input through to component video output).

It is also recommended that you press the [VCR/DVR] and [RETURN] buttons on the AV receiver at the same

time. Select “Skip” in the “VideoProcessor” setting by pressing the [RETURN] button repeatedly on the display.

To reset back to the original setting, press the same button at the same time.

■ “Monitor Out” Setting Set to “HDMI Main” or “HDMI Sub”

With the “Monitor Out” setting set to “HDMI

Main” or “HDMI Sub” (see page 52), video input

signals flow through the AV receiver as shown,

with composite video, S-Video, and component

video sources all being upconverted for the

HDMI output. Use the “HDMI Main” or

“HDMI Sub” setting if you connect the AV

receiver’s HDMI OUT MAIN or HDMI OUT

SUB, respectively, to your TV.

The composite video, S-Video, and component

video outputs pass through their respective input

signals as they are.

Note:

If not connected to the same output you have

selected in the “Monitor Out” setting, the “Mon-

itor Out” setting will be automatically switched

to “Analog” (see page 52). In this case, the set-

ting of the output resolution will be that for HDMI output (see page 52). However, it will be switched to “1080i” when

“1080p” is selected, and to “Through” when “Auto” is selected.

Connecting Both Audio & Video

: Signal Flow

Video

Audio

Video

Audio

Speakers

(see page 21 for connection information)

DVD/BD player, etc.

TV, projector,

etc.

Which Connections Should I Use?

MONITOR OUT

DVD/BD player, etc.

AV receiver

TV, projector, etc.

Composite

S-Video

Component

Video Signal Flow Chart

HDMI

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR5007 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR5007

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info