Bedienungsanleitung Onkyo TX-NR579 (Seite 66 von 84) (Englisch)

462088

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

■ Only the front speakers produce sound

■ Only the center speaker produces sound

■ The surround speakers produce no sound

■ The center speaker produces no sound

■ The front high and surround back speakers

produce no sound

■ The subwoofer produces no sound

■ There’s no sound with a certain signal format

■ Can’t select the Pure Audio listening mode

■ Can’t get 6.1/7.1 playback

■ The speaker volume cannot be set as required

■ Noise can be heard

■ The Late Night function doesn’t work

■ About DTS signals

■ The beginning of audio received by an HDMI IN

can’t be heard

When the Stereo or Mono listening mode is selected,

only the front speakers and subwoofer produce

sound.

—

Check the Speaker Configuration. 43

If you use the Dolby Pro Logic IIx Movie, Dolby Pro

Logic IIx Music, or Dolby Pro Logic IIx Game

listening mode with a mono source, such as an AM

radio station or mono TV program, the sound is

concentrated in the center speaker.

—

Make sure the speakers are configured correctly. 43

When the T-D (Theater-Dimensional), Stereo or

Mono listening mode is selected, the surround

speakers produce no sound.

—

Depending on the source and current listening mode,

not much sound may be produced by the surround

speakers. Try selecting another listening mode.

—

Make sure the speakers are configured correctly. 43

When the Stereo or Mono listening mode is selected,

the center speaker produces no sound.

—

Make sure the speakers are configured correctly. 43

Depending on the current listening mode, no sound

may be produced by the front high and surround

back speakers. Select another listening mode.

Depending on the sources, the sound produced by

the front high and surround back speakers may be

weak.

—

Make sure the speakers are configured correctly. 43

While the “Powered Zone 2” setting is set to “Yes”,

playback in the main room is reduced to 5.1-

channels and the front high and surround back

speakers produce no sound.

When you play a source material that contains no

information in the LFE channel, the subwoofer

produces no sound.

—

Make sure the speakers are configured correctly. 43

Check the digital audio output setting on the

connected device. On some game consoles, such as

those that support DVD, the default setting is off.

—

With some DVD-Video discs, you need to select an

audio output format from a menu.

—

Depending on the input signal, some listening modes

cannot be selected.

33–36

The Pure Audio listening mode cannot be selected

while Zone 2 is on.

—

If no surround back speakers and front high speakers

are connected, or the Zone 2 speakers are being

used, 6.1/7.1 playback is not possible.

—

Depending on the number of connected speakers, it

is not always possible to select all of the listening

modes.

33–36

Check to see if a maximum volume has been set. 51

If the volume level of each individual speaker has

been adjusted to high positive values, then the

maximum master volume possible may be reduced.

Note that the individual speaker volume levels are

set automatically after the Audyssey 2EQ

Room

Correction and Speaker Setup has been performed.

29, 44

Using cable ties to bundle audio cables with power

cords, speaker cables, and the like may degrade the

audio performance, so refrain from doing it.

—

An audio cable may be picking up interference. Try

repositioning your cables.

—

Make sure the source material is Dolby Digital,

Dolby Digital Plus, and Dolby TrueHD.

When DTS program material ends and the DTS

bitstream stops, the AV receiver remains in DTS

listening mode and the DTS indicator remains on.

This is to prevent noise when you use the pause, fast

forward, or fast reverse function on your player. If

you switch your player from DTS to PCM, because

the AV receiver does not switch formats

immediately, you may not hear any sound, in which

case you should stop your player for about three

seconds, and then resume playback.

—

With some CD and LD players, you won’t be able to

playback DTS material properly even though your

player is connected to a digital input on the AV

receiver. This is usually because the DTS bitstream

has been processed (e.g., output level, sampling rate,

or frequency response changed) and the AV receiver

doesn’t recognize it as a genuine DTS signal. In such

cases, you may hear noise.

—

Playing DTS program material, using the pause, fast

forward, or fast reverse function on your player may

produce a short audible noise. This is not a

malfunction.

—

Since it takes longer to identify the format of an

HDMI signal than it does for other digital audio

signals, audio output may not start immediately.

—

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR579 Seite 66

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR579

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info