Bedienungsanleitung Onkyo TX-NR807 (Seite 142 von 148) (Englisch)

553771

142

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

142

Troubleshooting—Continued

Playback stops while listening to music files on

the server

• Make sure your server is compatible with the AV

receiver (page 112).

• If you download or copy large files on your computer,

playback may be interrupted. Try closing any unused

programs, use a more powerful computer, or use a

dedicated server.

• If the server is serving large music files to several net-

worked devices simultaneously, the network may

become overloaded and playback may be interrupted.

Reduce the number of playback devices on the net-

work, upgrade your network, or use a switch instead

of a hub.

Can’t connect to the AV receiver from a Web

browser

• If you’re using DHCP, your router may not always

allocate the same IP address to the AV receiver, so if

you find that you can’t connect to a server or Internet

radio station, recheck the AV receiver’s IP address on

Network screen.

• Check the Network settings (page 113).

The sound changes when I connect my

headphones

• When a pair of headphones is connected, the listening

mode is set to Stereo, unless it’s already set to Stereo,

Mono, Direct, Pure Audio or DTS Surround Sensa-

tion.

The display doesn’t work

• The display is turned off when the Pure Audio listen-

ing mode is selected.

How do I change the language of a multiplex

source

• Use the “Multiplex” setting on the “Audio Adjust”

menu to select “Main” or “Sub” (page 89).

The u functions don’t work

• To use u, you must make an u connection and an

analog audio connection (RCA) between the compo-

nent and AV receiver, even if they are connected digi-

tally (page 41).

The functions Auto Power On/Standby and

Direct Change don’t work for components

connected via u

• These functions don’t work when Zone 2/3 is turned

on.

When performing “Audyssey MultEQ

Room

Correction and Speaker Setup”, the

measurement fails showing the message

“Ambient noise is too high.”.

• This can be caused by any malfunction in your speaker

unit. Check if the unit produces normal sounds.

The following settings can be made for the S-

Video, composite video and COMPONENT

VIDEO inputs

You must use the buttons on the AV receiver to make

these settings.

1. While holding down the input selector button for the

input source that you want to set, press the [SETUP]

button.

2. Use the Left and Right [e]/[r] buttons to change

the setting.

3. Press the input selector button for the input source

that you want to set when you’ve finished.

•Video Attenuation

This setting can be made for the DVD/BD, VCR/

DVR, CBL/SAT, GAME, AUX, or COMPONENT

VIDEO input. (You need to assign the input source

for COMPONENT VIDEO input.)

If you have a games console connected to the

S-Video, composite and component video input, and

the picture isn’t very clear, you can attenuate the

gain.

Video ATT:OFF: (default).

Video ATT:ON: Gain is reduced by 2 dB.

Others

The AV receiver contains a microcomputer for signal pro-

cessing and control functions. In very rare situations,

severe interference, noise from an external source, or

static electricity may cause it to lockup. In the unlikely

event that this happens, unplug the power cord from the

wall outlet, wait at least five seconds, and then plug it

back in again.

Onkyo is not responsible for damages (such as CD

rental fees) due to unsuccessful recordings caused by

the unit’s malfunction. Before you record important

data, make sure that the material will be recorded cor-

rectly.

Before disconnecting the power cord from the wall out-

let, set the AV receiver to Standby.

TX-NR807_En.book Page 142 Tuesday, July 28, 2009 12:00 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR807 Seite 142

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR807

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info