Bedienungsanleitung Onkyo TX-NR828 (Seite 27 von 152) (Englisch)

527521

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

Turning On & Basic Operations

En-27

With the supplied calibrated microphone,

Audyssey MultEQ

automatically determines the

number of speakers connected, their size for

purposes of bass management, optimum crossover

frequencies to the subwoofer (if present), and

distances from the primary listening position.

Audyssey MultEQ then removes the distortion caused

by room acoustics by capturing room acoustical

problems over the listening area in both the frequency

and time domain. The result is clear, well-balanced

sound for everyone. Audyssey MultEQ can be used

with Audyssey Dynamic EQ

and

Audyssey Dynamic Volume

(➔ page 69).

Before using this function, connect and position all of

your speakers.

Audyssey MultEQ offers two ways of measuring: the

“Audyssey Quick Start” and “Audyssey MultEQ

Full Calibration”.

•“Audyssey Quick Start” uses the measurement

from one position to perform the speaker setting

only.

•“Audyssey MultEQ Full Calibration” uses the

measurement from six positions to correct room

response in addition to the speaker setting.

The more positions are used in measuring, the better

the listening environment will become. We

recommend using a measurement from six positions

to create the best listening environment.

The Quick Start takes 2 minutes and Full Calibration

takes about 20 minutes.

Total measurement time varies depending on the

number of speakers.

Measurement procedure

To create a listening environment in your home

theater that all listeners will enjoy, Audyssey MultEQ

takes measurements at up to six positions within the

listening area. Position the microphone at ear height

of a seated listener with the microphone tip pointed

directly at the ceiling using a tripod. Do not hold the

microphone in your hand during measurements as

this will produce inaccurate results.

■ First measurement position

Also referred to as the Main Listening Position, this

refers to the most central position where one would

normally sit within the listening environment.

Audyssey MultEQ uses the measurements from this

position to calculate speaker distance, level, and the

optimum crossover value for the subwoofer.

■ Second-sixth measurement positions

These are the other listening positions (i.e., the

places where the other listeners will sit). You can

measure up to six positions.

Note

• Make the room as quiet as possible. Background noise and

Radio Frequency Interference (RFI) can disrupt the room

measurements. Close windows, televisions, radios, air

conditioners, fluorescent lights, home appliances, light

dimmers, or other devices. Turn off the cell phone (even if

it is not in use) or place it away from all audio electronics.

• The microphone picks up test tones played through each

speaker as Audyssey MultEQ Room Correction and

Speaker Setup runs.

• Audyssey MultEQ Room Correction and Speaker Setup

cannot be performed while a pair of headphones is

connected.

Using the Automatic Speaker Setup

fed

: Listening area

a to f: Listening position

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR828 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR828

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info