Bedienungsanleitung Onkyo TX-NR828 (Seite 62 von 152) (Englisch)

527521

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

Advanced Operations

En-62

Operating

procedure

(➔ page 60)

Tip

• You can see the picture by pressing ENTER to check the

“Resolution” setting for HDMI OUT MAIN (excluding NET,

USB and BLUETOOTH input source).

Note

• With some TVs, video signals are processed in the same

way as “Through” when this setting is set to “4K”.

• If the “Monitor Out” setting is set to “Sub”, this setting is

fixed to “Through”.

• If the “Monitor Out” setting is set to “Both”, this setting is

fixed to “Auto”.

• For optimum video performance, THX recommends using

the HDMI output and setting the video resolution to

“Through”.

When signal is 1080p input at 24 frames per second, it

will be 1080p output at 24 frames per second.

HDMI Input

If you connect a video component to an HDMI input,

you must assign that input to an input selector. For

example, if you connect your Blu-ray Disc/DVD player

to HDMI IN 2, you must assign “HDMI2” to the

“BD/DVD” input selector.

If you’ve connected your TV to the AV receiver with

an HDMI cable, composite video and component

video sources can be upconverted

and output by the

HDMI output. You can set this for each input selector

by selecting the “-----” option. See “The video and

audio signal flow” for more information on video

signal flow and upconversion (➔ page 20).

Here are the default assignments.

■ BD/DVD, CBL/SAT, STB/DVR, GAME1, GAME2,

PC, TV/CD, PHONO

` HDMI1, HDMI2, HDMI3, HDMI4, HDMI5, HDMI6,

HDMI7:

Select the input to which the component has

been connected.

` -----:

Output composite video and component video

sources from the HDMI output. The video output

signal from the HDMI output is the one

configured in “Component Video Input”.

Each HDMI input cannot be assigned to two input

selectors or more. When HDMI1 - HDMI7 have

already been assigned, you must first set any

unused input selectors to “-----” or you will be

unable to assign HDMI1 - HDMI7 to other input

selectors.

Note

• If no video component is connected to the HDMI input (even

if the HDMI input is assigned), the AV receiver selects the

video source based on the setting of “Component Video

Input”.

• When an HDMI IN is assigned to an input selector as

explained here, the same HDMI IN will be set as a priority

in the “Digital Audio Input”. In this case, if you want to use

the coaxial or optical audio input, make the appropriate

selection in the “Audio Selector” setting (➔ page 72).

• Do not assign an HDMI IN to the TV/CD selector while

“HDMI CEC (RIHD)” is set to “On” (➔ page 74), otherwise

appropriate CEC (Consumer Electronics Control) operation

will not be guaranteed.

• If you assign “-----” to an input selector that is currently

selected in “HDMI Through” (➔ page 75), the “HDMI

Through” setting will be automatically switched to “Off”.

•“AUX” is used only for input from the front panel.

• In order for the AV receiver to upconvert component input

to HDMI output, the source output must be set to 480i/576i.

When signal is input at resolution of 480p/576p and more,

error message will be displayed.

Input selector Default assignment

BD/DVD HDMI1

CBL/SAT HDMI2

STB/DVR HDMI3

GAME1 HDMI4

GAME2 HDMI5

PC HDMI6

AUX Front/MHL (Fixed)

TV/CD -----

PHONO -----

OUT

Composite video,

component video

HDMI

Composite video,

component video

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR828 Seite 62

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR828

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info