Bedienungsanleitung Onkyo TX-NR828 (Seite 63 von 152) (Englisch)

527521

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

Advanced Operations

En-63

Operating

procedure

(➔ page 60)

Component Video Input

If you connect a video component to a component

video input, you must assign that input to an input

selector. For example, if you connect your Blu-ray

Disc/DVD player to COMPONENT VIDEO IN 2, you

must assign “IN2” to the “BD/DVD” input selector.

Here are the default assignments.

■ BD/DVD, CBL/SAT, STB/DVR, GAME1, GAME2,

PC, AUX, TV/CD, PHONO

` IN1, IN2:

Select the input to which the component has

been connected.

` -----:

Output composite video sources from the HDMI

output.

Note

• When composite video and component video sources are

upconverted for HDMI OUT SUB, only signals with a

resolution of 480i/576i are output and the resolution

remains the same. If your TV doesn’t support this

resolution, there will be no picture (➔ page 98).

Digital Audio Input

If you connect a component to a digital audio input,

you must assign that input to an input selector. For

example, if you connect your CD player to the

OPTICAL IN 1, you must assign “OPTICAL1” to the

“TV/CD” input selector.

Here are the default assignments.

■ BD/DVD, CBL/SAT, STB/DVR, GAME1, GAME2,

PC, AUX, TV/CD, PHONO

` COAXIAL1, COAXIAL2, COAXIAL3, OPTICAL1,

OPTICAL2:

Select the input to which the component has

been connected.

` -----:

Select if the component is connected to an

analog audio input.

Note

• When an HDMI IN is assigned to an input selector in

“HDMI Input” (➔ page 62), the same HDMI IN will be set

as a priority in this assignment. In this case, if you want to

use the coaxial or optical audio input, make the appropriate

selection in the “Audio Selector” (➔ page 72).

• Supported sampling rates for PCM signals (stereo/mono)

from a digital input (optical and coaxial) are

32/44.1/48/88.2/96 kHz/16, 20, 24 bit.

Here you can check the settings made by

Audyssey MultEQ

Room Correction and Speaker

Setup function, or set them manually, which is useful

if you change one of the connected speakers after

using Audyssey MultEQ Room Correction and

Speaker Setup function (➔ page 27).

Note

• These settings are not available in either of the following

cases:

– a pair of headphones is connected.

–The “Audio TV Out (Main)” setting is set to “On”

(➔ page 75) or “Audio TV Out (Sub)” setting is set to

“On” (➔ page 75) and you’re listening through your TV

speakers.

–“HDMI CEC (RIHD)” is set to “On” (➔ page 74) and

you’re listening through your TV speakers.

Speaker Settings

If you bi-amp the front speakers, you must change the

“Speakers Type(Front)” setting. For details on

speaker wire connection, see “Bi-amping the Front

Speakers” (➔ page 17).

Note

• When bi-amping is used, the AV receiver is able to drive up

to 5.1 speakers in the main room.

• Before you change these settings, turn down the volume.

■ Speaker Impedance

` 4ohms:

Select if the impedance of any speaker is

4 ohms or more but less than 6.

` 6ohms

Select if the impedances of all speakers are

between 6 and 16 ohms.

Input selector Default assignment

BD/DVD IN1

CBL/SAT IN2

STB/DVR -----

GAME1 -----

GAME2 -----

PC -----

AUX -----

TV/CD -----

PHONO -----

Input selector Default assignment

BD/DVD COAXIAL1

CBL/SAT COAXIAL2

STB/DVR COAXIAL3

GAME1 OPTICAL1

GAME2 -----

PC -----

AUX -----

TV/CD OPTICAL2

PHONO -----

2. Speaker Setup

If you change these settings, you must run

Audyssey MultEQ Room Correction and Speaker

Setup again (➔ page 27).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR828 Seite 63

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR828

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info