Bedienungsanleitung Onkyo TX-NR828 (Seite 82 von 152) (Englisch)

527521

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

En-82

Operating

procedure

(➔ page 60)

Controlling Other Components

Controlling Other

Components

You can use the AV receiver’s remote controller to

control your other AV components, including those

made by other manufacturers. This section explains

how to enter the remote control code for a component

that you want to control: DVD, TV, CD, etc.

See “Learning Commands” for learning commands

directly from another component’s remote controller

(➔ page 89).

See “Using Normal Macros” for programming

ACTIVITIES to perform a sequence of remote control

actions (➔ page 90).

The following REMOTE MODE buttons are

preprogrammed with remote control codes for

controlling the components listed. You do not need to

enter a remote control code to control these

components.

For details on controlling these components, see the

indicated pages.

You can look up for an appropriate remote control

code from the on-screen menu.

Note

• You need to connect your TV to the HDMI output (HDMI

OUT MAIN) to make the following on-screen setting.

You’ll need to enter a code for each component that

you want to control.

Preprogrammed Remote Control

Codes

BD/DVD Onkyo Blu-ray Disc player (➔ page 84)

TV/CD Onkyo CD player (➔ page 83)

STB/DVR Apple TV

Looking up for Remote Control Codes

Press RECEIVER followed by HOME.

Use e/r or q/w to select “Setup”, and then

press ENTER.

Use q/w to select “Remote Controller Setup”,

and then press ENTER.

Use q/w to select “Remote Mode Setup”, and

then press ENTER.

Use q/w to select a remote mode, and then

press ENTER.

The menu of category selection appears.

Use q/w to select a category, and then press

ENTER.

The keyboard screen for brand name input

appears.

Use q/w/e/r to select a character, and then

press ENTER.

Repeat this step for the first three characters of

the brand name.

When you have entered the 3rd character, select

“Search” and press ENTER.

A list of brand names is retrieved.

If the desired brand name is not found:

Use r to select “Not Listed”, and then press

ENTER.

The keyboard screen for brand name input

appears.

Use q/w to select a brand, and then press

ENTER.

A remote control code with its instructions are

displayed. Follow the procedure.

If you can control the component, use q/w to

select “OK”, and then press ENTER.

The on-screen menu returns to the “Remote

Mode Setup” front screen.

If you cannot control the component, use q/w

to select “Try Next Code” and press ENTER.

The next code is displayed.

Entering Remote Control Codes

Look up the appropriate remote control code

in the separate Remote Control Codes list.

The codes are organized by category (e.g., DVD

player, TV, etc.).

While holding down the REMOTE MODE

button to which you want to assign a code,

press and hold down DISPLAY (about 3

seconds).

The REMOTE MODE button lights.

Note

• Remote control codes cannot be entered for

RECEIVER and the multi zone button.

• Only TV remote control codes can be entered for TV.

• Except for RECEIVER, TV, and the multi zone button,

remote control codes from any category can be

assigned for the REMOTE MODE buttons. However,

these buttons also work as input selector buttons, so

choose a REMOTE MODE button that corresponds

with the input to which you connect your component.

For example, if you connect your CD player to the CD

input, choose TV/CD when entering its remote control

code.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR828 Seite 82

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR828

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info