Bedienungsanleitung Onkyo TX-NR906 (Seite 94 von 150) (Englisch)

62439

Zoom out

Zoom in

Vorherige Seite

1/150

Nächste Seite

Advanced Setup—Continued

Monitor Out

Resolution

You can specify the output resolution for the HDMI out-

puts and have the AV receiver upconvert the picture res-

olution as necessary to match the resolution supported

by your TV.

Brightness

With this setting you can adjust the picture brightness.

Can be adjusted from –50 to +50 in steps of 1 (default is

0).

“–50” is the darkest.

“+50” is the brightest.

Contrast

With this setting you can adjust Contrast.

Can be adjusted from –50 to +50 in steps of 1 (default is

0).

“–50” is the least.

“+50” is the greatest.

Hue

With this setting you can adjust the red/green balance.

Can be adjusted from –20 to +20 in steps of 1 (default is

0).

“–20” is the strongest green.

“+20” is the strongest red.

Saturation

With this setting you can adjust saturation.

Can be adjusted from –50 to +50 in steps of 1 (default is

0).

“–50” is the weakest color.

“+50” is the strongest color.

Gamma

Adjust the balance of incoming picture R (red), G

(green), and B (blue) color data signal to the output color

data signal.

Can be adjusted from –3 to +3 in steps of 1 (default is 0).

R Brightness

With this setting you can adjust the picture red bright-

ness.

Can be adjusted from –50 to +50 in steps of 1 (default is

0).

“–50” is the darkest.

“+50” is the brightest.

R Contrast

With this setting you can adjust red Contrast.

Can be adjusted from –50 to +50 in steps of 1 (default is

0).

“–50” is the least.

“+50” is the greatest.

GBrightness

With this setting you can adjust the picture green bright-

ness.

Can be adjusted from –50 to +50 in steps of 1 (default is

0).

“–50” is the darkest.

“+50” is the brightest.

G Contrast

With this setting you can adjust green Contrast.

Can be adjusted from –50 to +50 in steps of 1 (default is

0).

“–50” is the least.

“+50” is the greatest.

B Brightness

With this setting you can adjust the picture blue bright-

ness.

Can be adjusted from –50 to +50 in steps of 1 (default is

0).

“–50” is the darkest.

“+50” is the brightest.

B Contrast

With this setting you can adjust blue Contrast.

Can be adjusted from –50 to +50 in steps of 1 (default is

0).

“–50” is the least.

“+50” is the greatest.

Through: Select this to pass video through the AV

receiver at the same resolution and with no

conversion (default).

Auto: Select this to have the AV receiver automat-

ically convert video at resolutions not sup-

ported by your TV.

(Not available when the “Monitor Out” set-

ting is set to “Analog”.)

480p (480/576p):

Select this for 480p or 576p output and

video conversion as necessary.

720p: Select this for 720p output and video con-

version as necessary.

1080i: Select this for 1080i output and video con-

version as necessary.

1080p: Select this for 1080p output and video con-

version as necessary.

(Not available when the “Monitor Out” setting

is set to “Analog”.)

Source:

Output will be according to the resolution level

which was set with Resolution inside Source:

4-4. Picture Adjust. (Setting for each Source

becomes possible.)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR906 Seite 94

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR906

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info