Bedienungsanleitung Onkyo TX-NR906 (Seite 98 von 150) (Englisch)

62439

Zoom out

Zoom in

Vorherige Seite

1/150

Nächste Seite

Advanced Setup—Continued

Setting Speakers A and Speakers B

(TX-NR906 only)

If you’re using Speakers B, you can choose whether or

not to use the subwoofer, center, surround, and surround

back speakers with the Speakers A and Speakers B con-

figurations independently. You cannot choose whether

or not to use the front speakers.

Use the remote controller’s [SP A] or [SP B] button to

select Speakers A or Speakers B, respectively.

Press the Down [w] button to dis-

play the bottom half of the

“Speaker Config” screen.

Notes:

• The bottom half of the “Speaker

Config” screen can only be displayed

when the “Speaker Type:

Front(Speaker B)” setting is set to

something other than “Not Use”

(page 61).

• You can switch between the Speak-

ers A and Speakers B settings on

either half of the “Speaker Config”

screen.

Use the Up and Down [q]/[w] but-

tons to select “Subwoofer”, and

then use the Left and Right

[e]/[r] buttons to select:

Not Use: Select if you don’t want to

use the subwoofer with

Speakers A or Speakers B.

Use: Select if you do want to use

the subwoofer with Speakers

A or Speakers B.

Note:

Cannot be set if “Subwoofer” (step 5) is

set to “No”.

These settings are not set automatically by the Auto-

matic Speaker Setup function (see page 64).

RETURN

EXIT

SETUP

MOVE VAL U E

2–2. Speaker Config

Subwoofer

Front

Center

Surround

SurrBack

Not Use

Use

Not Use

Use

Speaker A

Use the Up and Down [q]/[w] but-

tons to select “Center”, and then

use the Left and Right [e]/[r]

buttons to select:

Not Use: Select if you don’t want to

use the center speaker with

Speakers A or Speakers B.

Use: Select if you do want to use

the center speaker with

Speakers A or Speakers B.

Note:

Cannot be set if the “Center” (step 7) is

set to “None”.

Use the Up and Down [q]/[w] but-

tons to select “Surround”, and

then use the Left and Right

[e]/[r] buttons to select:

Not Use: Select if you don’t want to

use the surround speakers

with Speakers A or Speakers

Use: Select if you do want to use

the surround speakers with

Speakers A or Speakers B.

Note:

Cannot be set if the “Center” (step 8) is

set to “None”.

Use the Up and Down [q]/[w] but-

tons to select “SurrBack”, and

then use the Left and Right

[e]/[r] buttons to select:

Not Use: Select if you don’t want to

use the surr back speakers

with Speakers A or Speakers

Use: Select if you do want to use

the surr back speakers with

Speakers A or Speakers B.

Note:

• Fixed at “Not Use” if “Surround”

(step 16) is set to “Not Use”.

• Cannot be set if “Speaker Type:

Front(Speaker B)” is set to

“Bi-Amp” or “BTL” (page 61),

“SurrBack” is set to “None” (step 9),

or “Powered Zone2” is being used

(page 132).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR906 Seite 98

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR906

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info