Bedienungsanleitung Onkyo TX-RZ800 (Seite 105 von 142) (Englisch)

601863

105

Zoom out

Zoom in

Vorherige Seite

1/142

Nächste Seite

Troubleshooting

En-69

Listening Mode

● When listening to Dolby Digital and/or DTS sound,

digital connection is necessary.

● Check the digital audio output setting on the connected

component. On some game consoles, such as those

that support DVD, the default setting is off.

● After pressing RCV on the remote controller, repeatedly

press DISPLAY to switch the display on the main unit.

You can see the input format.

If the above does not solve the problem, check the

following.

 Cannot select a desired listening mode

● Depending on the connecting status of the speaker,

some listening modes may not be selected. Check the

details in "Selectable Listening Modes" section.

 There is no sound with Dolby Atmos

● You need to have either back speakers or height

speakers connected. After connecting each of the

speakers, make sure the connection settings in

"Configuration" - "Speaker Channels" are correct.

● Dolby Atmos play is only possible when the input signal

is Dolby Atmos.

 Cannot select the Pure Audio listening mode

● The Pure Audio listening mode cannot be selected while

Zone 2/Zone 3 is on.

Video

● Check that the output jack of the connected equipment

and the input jack of this unit are connected correctly.

● Make sure that none of the connecting cables are bent,

twisted, or damaged.

● Make sure the switching of input screens is proper at the

monitor side such as a TV.

If the above does not solve the problem, check the

following.

 There is no picture from a source connected to an

HDMI IN

● The input selector of this unit needs to be in the

position that corresponds to the jack where the player is

connected.

● While the Pure Audio listening mode is selected only

video signals input through HDMI IN can be output.

● Check if "Resolution Error" is displayed on the main

unit display when video input via HDMI IN jack is not

displayed. In this case, the TV does not support the

resolution of the video input from the player. Change the

setting on the player.

● Reliable operation with an HDMI-to-DVI adapter is not

guaranteed. In addition, video signals from a PC are not

supported.

● Try switching off the Deep Color function. To turn off the

Deep Color function, while holding down STM on the

main unit, press

ON/STANDBY repeatedly until "Deep

Color:Off" appears on the display. To reactivate the

Deep Color function, repeat the above described step

until "Deep Color:On" is appeared on the display.

 There is no picture from a source connected to the

composite video/component video input jack

● If multiple videos are input into one input system,

HDMI signal output is prioritized. In this case, to output

composite video/component video, set "HDMI Input" to

"-----".

 Images flicker

● It is possible that the resolution of the player is not

compatible with the TV's resolution. If you have

connected the player to this unit with an HDMI cable, try

changing the output resolution on the player. There also

may be an improvement if you change the screen mode

on the TV.

Linked operation

 There is no HDMI linked operation with CEC-

compliant equipment such as a television

● Set the HDMI CEC (RIHD) setting of the unit to On.

Press RCV and then SETUP on the remote controller,

select "6. Hardware" - "HDMI" - "HDMI CEC (RIHD)" and

set to On.

● It is also necessary to make the HDMI linked system

settings on the CEC-compliant equipment. Check the

operating instructions.

 The RI functions do not work

● To use RI, you must make an RI connection and an

analog audio connection (RCA) between the component

and AV receiver.

● While Zone 2/Zone 3 is selected, the RI functions do not

work.

Tuner

 Reception is noisy, FM stereo reception is noisy, or

the "FM STEREO" indicator does not stay lit

● Re-check the antenna connection.

● Relocate your antenna.

● Move the unit away from your TV or PC.

● Passing cars and airplanes can cause interference.

● Concrete walls weaken radio signals.

● Listen to the station in mono.

● When listening to an AM station, operating the remote

controller may cause noise.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-RZ800 Seite 105

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-RZ800

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info