Bedienungsanleitung Onkyo TX-SR 505 E (Seite 66 von 72) (Englisch)

62082

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Troubleshooting

—Continued

• Make sure the speakers are conﬁgured correctly

(page 56).

The center speaker produces no sound

• When the Stereo or Mono listening mode is selected,

the center speaker produces no sound (page 50).

• Make sure the speakers are conﬁgured correctly

(page 56).

The surround back speakers produce no sound

• While speaker set B is on, speaker set A is reduced to

5.1-channel playback and the surround back speakers

produce no sound.

• The surround back speakers are not used with all lis-

tening modes. Select another listening mode

(page 50).

• Not much sound may be produced by the surround

back speakers with some sources.

• Make sure the speakers are conﬁgured correctly

(page 56).

The subwoofer produces no sound

• The subwoofer outputs no sound while only speaker

set B is on. Turn on speaker set A.

• When you play source material that contains no infor-

mation in the LFE channel, the subwoofer produces

no sound.

• Make sure the speakers are conﬁgured correctly

(page 56).

Speaker set B produces no sound

• Speaker set B only outputs sources that are connected

to an analog input. Make sure that the analog audio

cables are connected properly.

There’s no sound with a certain signal format

• Check the digital audio output setting on the con-

nected device. On some games consoles, such as those

that can play DVDs, the default setting is off.

•With some DVD-Video discs, you need to select an

audio output format from a menu.

Can’t get 6.1- or 7.1-channel playback

• While speaker set B is on, speaker set A is reduced to

5.1-channel playback.

The volume cannot be set to 79

• When the volume level of each speaker has been

adjusted (pages 47, 59), the maximum possible vol-

ume may be reduced.

Noise can be heard

• Using cable ties to bundle audio cables with power

cords, speaker cables, and so on may degrade the

audio performance, so don’t do it.

• An audio cable may be picking up interference. Try

repositioning your cables.

The Late Night function doesn’t work

• Make sure the source material is Dolby Digital

(page 52).

The multichannel DVD input doesn’t work

• Check the multichannel DVD input connections

(page 26).

•To select the multichannel DVD input, press the

[MULTI CH] input selector button.

• Check the audio output settings on your DVD player.

About DTS signals

• When playing DTS program material, using the pause,

fast forward, or fast reverse function on your player

may produce a short audible noise. This is not a mal-

function.

• When DTS program material ends and the DTS bit-

stream stops, the AV receiver remains in DTS listen-

ing mode and the DTS indicator remains on. This is to

prevent noise when you use the pause, fast forward, or

fast reverse function on your player. If you switch your

player from DTS to PCM, because the AV receiver

does not switch formats immediately, you may not

hear any sound, in which case you should stop your

player for about 3 seconds, and then resume playback.

•With some CD players, you won’t be able to playback

DTS material properly even though your player is con-

nected to a digital input on the AV receiver. This is

usually because the DTS bitstream has been processed

(e.g., output level, sampling rate, or frequency

response changed) and the AV receiver doesn’t recog-

nize it as a genuine DTS signal. In such cases, you

may hear noise.

There’s no picture

• Make sure that all video connecting plugs are pushed

in all the way (page 22).

• Make sure that each video component is properly con-

nected.

•

For TX-SR505/TX-SR505E/TX-SR8550:

The AV

receiver does not convert between formats, so if a

video source component is connected to a component

video input, your TV must be connected to the compo-

nent video output (page 23).

•

For TX-SR575:

If your video component is con-

nected to a component video input, your TV must be

connected to the component video output (page 23)

•

For TX-SR505 North American model/

TX-SR505E/TX-SR575:

If a video component is

connected to an HDMI input, your TV must be con-

nected to the HDMI OUT (page 27).

• On your TV, make sure that the video input to which

the AV receiver is connected is selected.

Video

TX-SR505_En.book Page 66 Tuesday, January 30, 2007 11:53 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-SR 505 E Seite 66

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-SR 505 E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info