Bedienungsanleitung Onkyo TX-SR 505 E (Seite 67 von 72) (Englisch)

62082

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Troubleshooting

—Continued

• While the Pure Audio listening mode (not North Amer-

ican model) is selected, the video circuits are turned off

and the AV receiver outputs no video signals.

•

For TX-SR505 North American model/

TX-SR505E/TX-SR575:

Reliable operation with an

HDMI-to-DVI adapter is not guaranteed. In addition,

video signals from a PC are not supported (page 27).

Reception is noisy, stereo FM reception suffers

from hiss, or the FM STEREO indicator doesn’t

appear

• Relocate your antenna.

•Move the AV receiver away from your TV or com-

puter.

• Listen to the station in mono (page 42).

• When listening to an AM station, operating the remote

controller may cause noise.

•Passing cars and airplanes can cause interference.

• Concrete walls weaken radio signals.

• If nothing improves the reception, install an outdoor

antenna.

The remote controller doesn’t work

• Make sure that the batteries are installed with the cor-

rect polarity (page 16).

• Make sure that the remote controller is not too far

away from the AV receiver, and that there’s no

obstruction between the remote controller and the AV

receiver’s remote control sensor (page 16).

• Make sure you’ve selected the correct remote control-

ler mode (page 12).

• Make sure you’ve entered the correct remote control

code (page 62).

Can’t control other components

• Make sure you’ve selected the correct remote control-

ler mode (page 12).

• If you’ve connected an -capable Onkyo MD

recorder, CD recorder, or RI Dock to the TAPE

IN/OUT jacks or CBL/SAT jacks, for the remote con-

troller to work properly, you must set the Input Dis-

play to MD, CDR, or DOCK (page 39).

• The entered remote control code may not be correct. If

more than one code is listed, try each one.

•With some AV components, certain buttons may not

work as expected, and some may not work at all.

•To control an Onkyo component that’s connected via

, point the remote controller at the AV receiver. Be

sure to enter the appropriate remote control code ﬁrst

(page 62).

•To control an Onkyo component that’s not connected

via , or another manufacturer’s component, point

the remote controller at the component. Be sure to

enter the appropriate remote control code ﬁrst

(page 62).

Can’t record

• On your recorder, make sure the correct input is

selected.

•To prevent signal loops and damage to the AV

receiver, input signals are not fed through to outputs

with the same name (e.g., TAPE IN to TAPE OUT, or

VCR/DVR IN to VCR/DVR OUT).

• When the Pure Audio listening mode is selected,

recording is not possible because no video signals are

output. Select another listening mode.

The sound changes when I connect my head-

phones

• When a pair of headphones is connected, the listening

mode is set to Stereo, unless it’s already set to Stereo,

Mono, Direct, or Pure Audio (not North American

model).

The display doesn’t work

• The display is turned off when the Pure Audio (not

North American model) listening mode is selected.

How do I change the language of a multiplex

source

• Use the “Multiplex” setting on the “Audio Adjust”

menu to select Main or Sub (page 53).

The functions don’t work

•To use , you must make an connection and an

analog audio connection (RCA) between the compo-

nent and AV receiver, even if they are connected digi-

tally (page 33).

During automatic speaker setup, measurement

fails and the message “Noise Error!” appears

• This can be caused by a speaker malfunction. Make

sure all of your speakers are working properly.

Tuner

Remote Controller

Recording

Others

TX-SR505_En.book Page 67 Tuesday, January 30, 2007 11:53 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-SR 505 E Seite 67

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-SR 505 E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info