Bedienungsanleitung Onkyo TX-SR578 (Seite 63 von 72) (Englisch)

645345

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

■ There’s no sound

■ There’s no video

■ The AV receiver’s remote controller doesn’t

control your iPod

■ The AV receiver unexpectedly selects your iPod

as the input source

■ Can’t record

■ There’s no sound

■ The Zone 2 speakers produce no sound

■ The sound changes when I connect my

headphones

■ The speaker distance cannot be set as required

■ The display doesn’t work

■ How do I change the language of a multiplex

source

■ The u functions don’t work

■ The functions System On/Auto Power On and

Direct Change don’t work for components

connected via u

To control an Onkyo component that’s not connected

via u, point the remote controller at the compo-

nent. Be sure to enter the appropriate remote control

code first.

The entered remote control code may not be correct.

If more than one code is listed, try each one.

—

UP-A1 Dock for iPod

Make sure your iPod is actually playing. —

Make sure your iPod is inserted properly in the

Dock.

—

Make sure the UP-A1 Dock is connected to the UNI-

VERSAL PORT jack on the AV receiver.

—

Make sure the AV receiver is turned on, the correct

input source is selected, and the volume is turned up.

—

Make sure the plugs are pushed in all the way. —

Try resetting your iPod. —

Make sure that your iPod’s TV OUT setting is set to

On.

—

Make sure the correct input is selected on your TV or

the AV receiver.

—

Some versions of the iPod do not output video. —

Make sure your iPod is properly inserted in the

Dock. If your iPod is in a case, it may not connect

properly to the Dock. Always remove your iPod

from the case before inserting it into the Dock.

—

The iPod cannot be operated while it’s displaying the

Apple logo.

—

Make sure you’ve selected the right remote mode. —

When you use the AV receiver’s remote controller,

point it toward your AV receiver.

—

When connecting UP-A1 Dock to the radio tuner

UP-HT1 (North American models)/UP-DT1

(European, Australian and Asian models) with

AUTO selected by the tuner’s Mode Selector switch,

you can switch the input source between UP-A1

Dock and the tuner, by pressing PORT repeatedly

on the front panel.

—

If you still can’t control your iPod, start playback by

pressing your iPod’s Play button. Remote operation

should then be possible.

—

Try resetting your iPod. —

Depending on your iPod, some buttons may not

work as expected.

—

Always pause iPod playback before selecting a dif-

ferent input source. If playback is not paused, the

Direct Change function may select your iPod as the

input source by mistake during the transition

between tracks.

—

Recording

On your recorder, make sure the correct input is

selected.

—

To prevent signal loops and damage to the AV

receiver, input signals are not fed through to outputs

with the same name (VCR/DVR IN to VCR/DVR

OUT).

—

When the Pure Audio listening mode is selected,

recording is not possible because no video signals

are output. Select another listening mode.

—

Zone 2

Only components connected to analog inputs can be

played in Zone 2.

—

Powered Zone 2 cannot be used if “Speakers Type”

is set to “Bi-Amp”.

To use the Zone 2 speakers, you must set the “Front

High/Zone2” setting to “Zone2” .

Others

When a pair of headphones is connected, the listen-

ing mode is set to Stereo, unless it’s already set to

Stereo, Mono, Direct, or Pure Audio. (Pure Audio

listening mode is not available for North American

models.)

—

In some cases, corrected values suitable for home

theater use may be set automatically.

—

The display is turned off when the Pure Audio listen-

ing mode is selected.

—

Use the “Multiplex” setting on the “Audio Adjust”

menu to select “Main” or “Sub”.

To use u, you must make an u connection and an

analog audio connection (RCA) between the compo-

nent and AV receiver, even if they are connected dig-

itally.

These functions don’t work when Zone 2 is turned

on.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-SR578 Seite 63

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-SR578

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info