Bedienungsanleitung Pacojet 2 (Seite 11 von 29) (Englisch)

660371

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

Should the same-cycle repetitions option be se-

lected and programmed, the shaft and blade/disk

will retreat to its starting position between beaker

changes, or to the upper level of the selected ap-

proximate ll volumeuntiltheselectednumber of

same-cycle repetitions is complete.

* The Pacojet Coupe Set, designed to process

fresh, non-frozen foods, is not included in the

original PACOJET 2 system package. The Pacojet

Coupe Set is available as a optional add-on and

can be purchased from a Pacojet sales point.

Please refer to the separate instruction manual for

the Pacojet Coupe Set, giving particular attention

to the safety guidelines.

Cleaning cycles and machine settings5.8

The lower right selector button next to the lower

right icon can be pressed to switch to another dis-

play screen containing further options for cleaning

and general machine settings (or when pressed

again, to return back to the home screen).

There are two cleaning cycle options on the left side

of the display screen. Select the upper icon for a rins-

ing cycle or the lower icon for a full cleaning cycle.

The settings functions can be accessed by pressing

the selector button on the upper right of the control

panel, adjacent to the “cog-wheels” icon shown on

the display screen.

1/2

As soon as the protective outer beaker is mounted

and rotated into the correct position, the next dis-

play screen will appear with the default processing

settings selected for “Chop/Cut entire contents of

beaker” and “overpressure”; however, with the pos-

sibility of selecting the processing option “deacti-

vate overpressure before chopping”.

This processing option can be selected by pressing the appropriate selector

button adjacent to the processing mode icon, as shown on the display and be

furtherdenedusingthearrowbuttons.

Mixing/Whipping mode5.7.3

Mixing/Whippingfresh,liquidfoodsutilizingthepa-

cotizing blade or the whipping disk included in the

optional Pacojet Coupe Set (see page 21).

For further programming processing options within

the mixing/whipping mode, either the pacotizing

blade or the whipping disk (as supplied within the

Pacojet Coupe Set package) must be positioned

within the spray guard and correctly secured onto the

magnetic, splined shaft of the PACOJET 2 machine.

Then the pacotizing beaker and the protective outer

beaker must be correctly mounted in the machine.

As soon as the protective outer beaker is mounted

and rotated into the correct position, the next dis-

play screen will appear with the default processing

settings selected for “Mixing/Whipping entire con-

tents of beaker” and “overpressure”; however, with

the options of selecting the processing options “de-

activate overpressure before mixing/whipping”, “set

theapproximatellvolumeinthepacotizingbeaker

in terms of portions” and “set the number of same-

cycle repetitions”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pacojet 2 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pacojet 2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info