Bedienungsanleitung Pacojet 2 (Seite 12 von 29) (Englisch)

660371

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

Adjusting the presettings5.8.4

Select the Presettings options on the menu to cus-

tomize the PACOJET 2 presettings according to

your needs.

The default factory settings are as follows:

The default processing mode is “pacotizing” as programmed at the factory. •

The “overpressure” function is set by default at the factory for each process-•

ing mode.

Processing options chosen for a previous cycle are reset to default/factory •

settings after each processing task, i.e. each beaker change.

Consequently, each time the ON/OFF switch is used to power on the ma-

chine, the “pacotizing” and “overpressure” processing modes are already set.

The other processing modes, chopping/cutting and mixing/whipping are also

displayed on the home screen and may be selected by pressing the corre-

sponding selector button prior to each processing task.

Users can deactivate the default setting for overpressure by using the over-

pressure selector or the arrows buttons before beginning a particular process-

ing cycle.

After a processing task has been completed, the PACOJET 2 automatically

returns from the previous mode selected and programmed processing option

back to the default factory settings for “pacotizing” and “overpressure”.

However, it is possible to adjust and/or override the default factory- and other

presettings, according to a user’s particular needs.

Presettings

Mode

Pressure

Reset

Factory setting

Rinsing cycle5.8.1

To rinse the PACOJET 2 food contact components,

please see section 7.

Full cleaning cycle5.8.2

The procedure for implementing a full cleaning cy-

cle of the PACOJET 2 food contact components

can be found in section 7.

Machine settings5.8.3

Pressing the button to access the machine settings

on the selector panel will display the settings se-

lectionsfor“Presettings”,“Brightness”,“Language”,

as well as the usage information selections “Portion

counter” and “Version”.

Using the up- and down-arrow buttons, select the desired setting option and

conrmthe selectionby pressingthe buttonadjacent tothe validationicon

(check mark) on the display screen.

In the above mentioned manner, one can modify the settings for “Presettings”,

“Brightness”and“Language”,programmingthemindividuallybypressingthe

validation button.

Using the arrow buttons and the validation button, one can also select and

view the “Portion counter”, which tracks the total number of pacotized whole

portionsthemachinehascompleted,orconrmtheversionofyourmachine

by selecting “Version”.

Settings

Presettings

Brightness

Language

Portion counter

Version

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pacojet 2 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pacojet 2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info