Bedienungsanleitung Panasonic DMPBD10A (Seite 27 von 32) (Englisch)

602952

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

RQT8966

TV screen and video (continued) Page

Sound

HDMI connections

Other difficulties with playback

(Continued on the next page)

There is a lot of after-image

when playing video.

≥Turn “3D-NR”, “Integrated DNR” or “DNR” off if it is on. 14, 20

When playing DVD-Video using

progressive output, one part of

the picture momentarily

appears to be doubled up.

≥Set “Progressive” in the Picture menu to “Off”. This problem is caused by the editing method

or material used on DVD-Video, but should be corrected if you use interlace output.

There is no apparent change in

picture quality when adjusted

with the Picture menu in the

On-screen menu.

≥The effect is less perceivable with some types of video. —

No sound.

Low volume.

Distorted sound.

Cannot hear the desired audio

type.

≥Check the connections and the “Digital Audio Output” settings. Check the input mode on the

amplifier/receiver if you have connected one.

≥Press [AUDIO] to select the audio.

≥Turn off V.S.S. in the following cases.

–When using discs that do not have surround sound effects such as Karaoke discs.

–When playing bilingual broadcast programmes.

≥]BD-V] When playing discs recorded with Dolby TrueHD or DTS-HD, audio will not be output

properly unless the number of connected speakers is the same as the disc’s channel

specification.

≥[DVD-A] The disc may have restrictions on the method of audio output. With some multi-

channel discs, unless the number of connected speakers is the same as the disc’s channel

specification, audio will not be output properly. Refer to the disc’s jacket for more information.

≥Set “Attenuator” in the “Speaker” menu of the “Connection” tab to “On” if it causes distortion

with AUDIO OUT connections.

≥Match the speaker settings with the connected equipment. Change multi channel speaker

settings by selecting “Multi-channel” in “Speaker” of the “Connection” tab.

≥The sound effects will not work when the bitstream signal is output from the HDMI AV OUT

terminal or the DIGITAL AUDIO OUT terminal.

≥If the audio track of the disc was recorded with Dolby Digital Plus or Dolby TrueHD, Dolby

Digital audio will be output from the DIGITAL AUDIO OUT terminal.

≥If the audio track of the disc was recorded with DTS-HD Master Audio, it will be output as

DTS Digital Surround audio.

8–10, 22

—

Cannot switch audio. ≥There are discs for which audio cannot be changed because of how the disc was created.

≥When connecting an amplifier/receiver using a coaxial, an optical digital audio cable or an

HDMI cable, you cannot switch the audio if “Dolby Digital” is set to “Bitstream”. Set “Dolby

Digital” to “PCM” or connect using audio cables.

—

9, 10, 22

The images from this unit do

not appear on the television.

Picture is distorted.

≥To output video from a device connected with an HDMI cable, set “HDMI Video Mode” in the

“HDMI” tab to “On” in the Setup menu.

≥Picture may not be seen when more than 4 devices are connected with HDMI cables.

Reduce the number of connected devices.

—

The 4:3 aspect ratio picture

expands left and right.

Screen size is wrong.

≥Change “TV Aspect” type to “16:9”. 22

When playing DVD-Video using

progressive output, one part of

the picture momentarily

appears to be doubled up.

≥When you use the HDMI AV OUT terminal for video output, follow the steps below for setting.

1 Connect this unit to the TV with any cable except the HDMI cable

2 Set “HDMI Video Mode” in the “HDMI” tab to “Off” in the Setup menu

No sound.

Low volume.

Distorted sound.

Cannot hear the desired audio

type.

≥[DVD-A] The disc may have a restriction on the method of audio output.

This unit cannot playback multi-channel discs that prevent down-mixing unless the unit is

connected with an HDMI cable to an amplifier/receiver supporting HDCP. Refer to the disc

jacket for more information.

≥Audio may not be heard when more than 4 devices are connected with HDMI cables.

Reduce the number of connected devices.

≥The sound effects will not work when the bitstream signal is output from the HDMI AV OUT

terminal or the DIGITAL AUDIO OUT terminal.

≥To output audio from a device connected with an HDMI cable, set “HDMI Audio Output” in the

“HDMI” tab to “On” in the Setup menu.

≥If the unit is connected to a television with an HDMI cable and the audio from the 7.1ch

AUDIO OUT terminal is output as two channels only, set “HDMI Audio Output” in the “HDMI”

tab to “Off” in the Setup menu.

≥If the sound is distorted when the unit is connected to an amplifier/receiver with the HDMI

cable, adjust the settings in “Speaker” in the Setup menu to match the connection.

≥Depending on the connected equipment, the sound may be distorted if this unit is connected

with an HDMI cable.

≥The sound effects will not work when the bitstream signal is output from the HDMI AV OUT

terminal.

—

Cannot switch audio. ≥When connecting an amplifier/receiver using a coaxial, an optical digital audio cable or an

HDMI cable, you cannot switch the audio if “Dolby Digital” is set to “Bitstream”. Set “Dolby

Digital” to “PCM” or connect using audio cables.

9, 10, 22

Audio and video momentarily

pause.

≥This occurs between playlist chapters. —

DVD-Video is not played. ≥You have set a ratings level to limit DVD-Video play. Change this setting. 21

BD-Video is not played. ≥You have set a ratings level to limit BD-Video play. Change this setting.

≥Some BD-Video can only be output with HDMI.

—

Alternative soundtrack and

subtitles cannot be selected.

≥The languages are not recorded on the disc.

≥You may not be able to use the On-screen menu to change the soundtrack and subtitles on

some discs. Use the disc’s menus to make changes.

—

Reference 11 Troubleshooting guide

Reference

DMP-BD10A.book Page 27 Thursday, March 15, 2007 7:45 PM

Panasonic DMPBD10A Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic DMPBD10A

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info