Bedienungsanleitung Panasonic DMPBD10A (Seite 25 von 32) (Englisch)

602952

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

RQT8966

Frequently asked questions

Refer to the following items if you have any doubts about unit operations.

Setup Page

Disc

Troubleshooting guide

Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the chart

do not solve the problem, consult your dealer for instructions.

The following do not indicate a problem with this unit:

≥Regular disc rotating sounds.

≥Image disturbance during search.

To reset this unit Page

Power

(Continued on the next page)

What do I need to play multi channel

surround sound?

≥Connect to...

–an amplifier/receiver compatible with HDMI.

–an amplifier/receiver with 7.1ch/5.1ch AUDIO IN.

–an amplifier/receiver with a built-in (Dolby Digital, DTS or MPEG) decoder.

9, 10

Are headphones and speakers

directly connected to the unit?

≥You cannot directly connect them to the unit. Connect through the amplifier/receiver, etc. 9, 10

Is my television progressive output

compatible?

≥All Panasonic televisions that have 625 (576)/50i · 50p, 525 (480)/60i · 60p input

terminals are compatible. Consult the manufacturer if you have another brand of

television.

—

My television has a Scart terminal

and component video input terminal.

Which should I connect with?

≥If you have a regular television (CRT: cathode ray tube) we recommend using the Scart

terminal. You can enjoy high-quality RGB video from this unit by connecting to an RGB

compatible television.

If you have an LCD/plasma television or LCD projector compatible with progressive

scan, connect through the component video terminals for high-quality progressive video.

If you have a CRT television or a multi-system television using PAL mode that is

compatible with progressive scan, we cannot recommend progressive output as some

flickering can occur.

8, 9

Can I play BD-Video, DVD-Video,

DVD-Audio and Video CDs bought in

another country?

≥You cannot play:

–BD-Video discs that do not include region “B”.

–DVD-Video discs that do not include your region number or “ALL”. Refer to the cover of

these operating instructions for more information about your region number.

Refer to the disc’s jacket for more information.

Cover

Can BD-Video/DVD-Video that does

not have a region code/number be

played?

≥The region management information for BD-Video/DVD-Video indicates that the disc

conforms to industry standards. You cannot play discs that do not conform to industry

standards or do not have a region code or number.

—

Please tell me about disc

compatibility with this unit.

≥This unit plays BD-Video, DVD-Video, DVD-Audio, Video CD, CD, DVD-RAM (DVD

Video Recording format/AVCHD format/JPEG), DVD-R/RW (DVD-Video format, DVD

Video Recording format and AVCHD format), DVD-R DL (DVD-Video format, DVD

Video Recording format and AVCHD format), +R, +RW and +R DL.

≥This unit also plays CD-R/CD-RW discs which have been recorded in one of the

following standards: CD-DA, Video CD, MP3 and still pictures (JPEG). Close the

session after recording.

≥You cannot write to a disc with this unit.

—

To return to the factory preset

(No setting)

≥Reset the unit as follows:

1 Press [Í/I] on the unit to set to standby mode.

2 Press and hold [5/9], [< OPEN/CLOSE] and [∫] on the unit at the same time until

“HELLO” appears on the display.

3 Wait until “TEST” appears next.

4 Press [Í/I] on the unit to set to standby mode.

5 Disconnect the AC mains lead. Wait one minute, then reconnect it.

—

To return all the settings other

than the ratings level to the

factory preset

≥Select “Yes” in “Default Settings” in the Setup menu (“Others” tab).

This returns all values in the Setup menus and On-screen menu, except for the ratings level

to the default settings.

To restore the unit if it freezes

due to one of the safety

devices being activated

≥Press and hold [Í/I] on the main unit for 10 seconds. (The settings remain unchanged.) —

No power. ≥Insert the AC mains lead securely into a working household mains socket. 8, 9

The unit switches to standby

mode.

≥This is a power saving feature. It can be changed if desired using “Off Timer” in the Setup menu

(“Others” tab).

≥One of the unit’s safety devices is activated. Press [Í/I] on the main unit to turn the unit on.

—

Reference 11 Frequently asked questions / Troubleshooting guide

Reference Settings

DMP-BD10A.book Page 25 Thursday, March 15, 2007 7:45 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic DMPBD10A Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic DMPBD10A

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info