Bedienungsanleitung Panasonic SC-HTB770 (Seite 32 von 44) (Englisch)

618145

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

RQT9849

Advanced operations

To display the current audio format.

Press and hold [SOUND] for more than

4sec.

≥ The current audio format is indicated for 5 sec.



Audio format is not indicated when “” is selected as the

source.

Change the dual audio from main to secondary.

≥ This setting will only work if the audio output

setting on the connected TV or player, etc. is

set to “Bitstream” and dual audio is available in

the audio source.

Press and hold [MUTE] for more

than 4 sec.

While the setting is displayed, press

[MUTE] to change the setting.

≥ The setting changes each time [MUTE] is pressed.

≥ The indicator for the selected setting blinks for 20 sec and

then exits the setting mode.

≥ The setting is maintained until it is changed again.

With this function, you can prevent sudden loud

sounds. The output will be reduced automatically

when the input exceeds a certain level.

Press and hold [INPUT SELECTOR] on

the remote control for more than 4 sec.

While the setting is displayed, press

[INPUT SELECTOR] on the remote

control to change the setting.

≥ The setting changes each time [INPUT SELECTOR] is

pressed.

≥ The indicator for the selected setting blinks for 20 sec and

then exits the setting mode.

≥ The setting is maintained until it is changed again.

You can select different modes to suit the type of

connections with emphasis on connectivity or

high quality audio.

≥ Make sure that a Bluetooth

device is already

paired with this system. (> 28)

Press [ ] to select “ ”.

≥ “” indicator will blink slowly. If the indicator lights, a

Bluetooth

device is already connected with this system.

Disconnect it. (> 28)

Press [ ] to display the current mode.

While the mode is displayed, press

[ ] to select the mode.

≥ The setting changes each time [ ] is pressed.

≥ The indicator for the selected setting blinks for 10 sec and

then exits the setting mode.

≥ The setting is maintained until it is changed again.

Audio format indicator

“STADIUM” indicator blinks:

Dolby Digital is the audio format.

“MUSIC” indicator blinks:

DTS is the audio format.

“CINEMA” indicator blinks:

PCM is the audio format.

Changing the dual audio

“STANDARD” indicator blinks (A):

Main (Factory preset)

“STEREO” indicator blinks (B):

Secondary

(SAP: Secondary Audio Program)

When A and B both blink: Main and

secondary

Auto gain control

“STANDARD” indicator blinks:

Auto gain control is on.

“STEREO” indicator blinks:

Auto gain control is off.

(Factory preset)

Bluetooth

communication mode

“STANDARD” indicator blinks:

MODE1 (Factory preset)

Emphasis on connectivity

“STEREO” indicator blinks:

MODE2

Emphasis on audio quality

SC-HTB770_RQT9849-B_mst.book 32 ページ２０１３年２月２５日　月曜日　午前１１時５３分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SC-HTB770 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-HTB770

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info