Bedienungsanleitung Panasonic SC-HTB770 (Seite 34 von 44) (Englisch)

618145

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

RQT9849

∫

To reduce the clear-mode dialog effect

When the dialog does not sound natural while the

volume is set low, it is possible to reduce the

dialog enhancing effect as follows:

While pressing and holding [SOUND] on the

remote control, press and hold [s VOL] on the

main unit for more than 4 sec.

≥ All the indicators will blink once when the clear-mode

dialog effect is reduced.

≥ Even if clear-mode dialog effect is reduced, dialog effect

level is still adjustable.



To reset the setting, return to the factory preset. (> right)

∫

To turn off VIERA Link “HDAVI Control”

When “HDAVI Control” compatible equipment

does not work well with this system, for example,

it is possible to turn off this function as follows:

≥ When VIERA Link is turned off, the ARC

function is not available. Be sure to connect the

optical digital audio cable. (> 25)

1 While pressing and holding [MUTE] on the

remote control, press and hold [s VOL] on

the main unit for more than 4 sec.

2 After the setting has changed, turn off all the

connected devices and then turn them on again.

≥ All the indicators will blink once when VIERA Link “HDAVI

Control” is turned off.



To reset the setting, return to the factory preset. (> right)

∫ To turn off the volume limitation

If a state of the lowered volume disturbs you

every time the main unit turns on, for example, it

is possible to turn off this function as follows:

While pressing and holding [MUTE] on the

remote control, press and hold [VOL r] on the

main unit for more than 4 sec.

≥ All the indicators will blink once when the volume limitation

is turned off.



To reset the setting, return to the factory preset. (> right)

Reference

Troubleshooting

Before requesting service, make the following checks. If

you are in doubt about some of the check points, or if the

solutions indicated in the following guide do not solve the

problem, consult your dealer for instructions.

No power.

≥ Insert the AC mains lead securely. (> 27)

≥

After turning the main unit on, if the indicators blink

and the main unit immediately turns off, unplug the

AC mains lead and consult your dealer.

The remote control does not work properly.

≥

The battery is depleted. Replace it with a new one. (

≥

It is possible that the insulation sheet has not been

removed. Remove the insulation sheet. (

≥ It may be necessary to set the code of the

remote control again after changing the battery

of the remote control. (> 33)

≥ Use the remote control within the correct

operation range. (> 8)

The “TV” indicator blinks.

Remove the AC mains lead and consult your dealer. If

there are any other indicators blinking, be sure to

inform your dealer about the blinking indicators.

The main unit is automatically switched to

standby mode.

The auto standby function is on.

The main unit will automatically switch to standby

mode when no signal is input and no operation is

performed for approx. 2 hours. Refer to page 33

to turn this function off.

The main unit is turned off when the TV’s

speakers are selected in the speaker control.

This is a normal feature when using VIERA Link (HDAVI

Control 4 or later). Please read the operating instructions for

the TV for details about its power save feature. (

31)

To return to the factory preset.

While the main unit is on, press [Í/I] on the main

unit for more than 4 sec.

(All the indicators will blink twice when this

system is reset.)

If this system does not operate as expected,

returning the settings to the factory preset

may solve the problem.

≥

The remote control code will return to “1” when this

system is returned to the factory preset. To change

the remote control code, refer to page 33.

General operation

SC-HTB770_RQT9849-B_mst.book 34 ページ２０１３年２月２５日　月曜日　午前１１時５３分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SC-HTB770 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-HTB770

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info