Bedienungsanleitung Panasonic SCHC49EG (Seite 11 von 84) (Englisch, Spanisch, Polnisch)

608423

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

RQT9886

ENGLISH

∫ Manual tuning and presetting

Select a radio broadcast.

1 Press [PLAY MENU] repeatedly to select

“TUNEMODE”.

2 Press [3, 4] to select “MANUAL” and then press

[OK].

3 Press [:/6] or [5/9] to tune to the

required station.

≥ To start automatic tuning, press and hold [:/6] or

[5/9] until the frequency starts scrolling. Tuning

stops when a station is found.

To preset the channel

4 While listening to the radio broadcast, press [OK].

5 Press [3, 4] to select the channel and then press

[OK].

∫ To improve FM sound quality

1 While receiving FM broadcasts, press

[PLAY MENU] repeatedly to select “FM MODE”.

2 Press [3, 4] to select “MONO” and then press

[OK].

≥ This setting can be preset and memorised. To do so,

continue to step 4 of “Manual tuning and presetting”.



≥ Select “STEREO” in step 2 to return to stereo broadcasts.

≥ “MONO” is cancelled if the frequency is changed.

∫ To display the current FM signal status

While receiving FM signal, press [PLAY MENU]

repeatedly to display “FM STATUS” and then press

[OK].

∫ To display RDS text data

Press [DISPLAY, iPod MENU] to display the text data.

≥ Each time you press the button:



≥ “STEREO” is displayed when this unit tunes to a stereo

broadcast.

≥ The unit can display the text data transmitted by the radio

data system (RDS) available in some areas. (RDS displays

may not be available if reception is poor.)

Sound adjustment

The following sound effects can be added to the audio

output.

1 Press [SOUND] repeatedly to select the effect.

2 Press [3, 4] to select the setting and then press

[OK].

≥ You may experience a reduction in sound quality when these

effects are used with some sources. If this occurs, turn the

sound effects off.

Clock and Timer

This is a 24-hour clock.

1 Press [SETUP] repeatedly to select “CLOCK”.

2 Press [3, 4] to set the time and then press [OK].



≥ To display the clock, press [SETUP] repeatedly to select

“CLOCK” and then press [OK] once. The time is displayed for

10 seconds.

(During standby, press [DISPLAY, iPod MENU] once.)

≥ The clock is reset when there is a power failure or when the

AC mains lead is removed.

≥ Reset the clock regularly to maintain accuracy.

“FM ST”: The FM signal is tuned and in stereo.

“FM”: There is no tuned signal or the FM signal

is in monaural.

“FM MONO”: “MONO” is selected in step 2 of “To

improve FM sound quality” (l above).

“PS”: Programme service

“PTY”: Programme type

“FREQ”: Frequency display

“PRESET EQ”

(Preset Equalizer)

“HEAVY” (heavy), “SOFT” (soft),

“CLEAR” (clear), “VOCAL”

(vocal) or “FLAT” (flat/off).

≥ The factory default is “HEAVY”.

“BASS” (Bass) or

“TREBLE” (Treble)

Adjust the level (j4 to i4).

“D.BASS”

(Dynamic Bass)

“ON D.BASS” or “OFF D.BASS”.

≥ The factory default is

“ON D.BASS”.

“SURROUND”

(Surround)

“ON SURROUND” or

“OFF SURROUND”.

≥ The factory default is

“OFF SURROUND”.

Setting the clock

SC-HC49EG~RQT9886-R.book 11 ページ２０１４年４月３日　木曜日　午前９時２９分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCHC49EG Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SCHC49EG

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info