Bedienungsanleitung Panasonic SCHC49EG (Seite 12 von 84) (Englisch, Spanisch, Polnisch)

608423

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

RQT9886

You can set the timer so this unit turns on at a certain

time every day.

Preparation

Set the clock.

∫ Setting the timer

1 Press [SETUP] repeatedly to select “TIMER ADJ”.

2 Press [3, 4] to set the starting time (“ON TIME”)

and then press [OK].

3 Press [3, 4] to set the finishing time

(“OFF TIME”) and then press [OK].

4 Press [3, 4] to select the music source*

and then

press [OK].

∫ Turning the timer on

1 Prepare the selected music source and set the

desired volume.

2 Press [SETUP] repeatedly to select “TIMER SET”.

3 Press [3, 4] to select “SET” and then press [OK].

≥ “F” is displayed.

≥ To turn the timer off, select “OFF”.

4 Press [Í] to turn the unit to standby mode.



≥ To display the timer settings, press [SETUP] repeatedly to

select “TIMER ADJ” and then press [OK] once.

The music source and volume will also be displayed if the

timer is turned on.

≥ During standby, if the timer is turned on, press [DISPLAY,

iPod MENU] twice to display the settings.

≥ This unit can be used as normal after the timer is set,

however:

– Turn the unit to standby mode before the timer start time.

– Even if the audio source or the volume is changed, the

timer will still use the audio source and volume that was

set when the timer was turned on.

The sleep timer can turn the unit off after a set time.

1 Press [SETUP] to select “SLEEP”.

2 Press [3, 4] to set the time (in minutes) and then

press [OK].

“SLEEP 30” ,. “SLEEP 60” ,. “SLEEP 90” ,. “SLEEP 120”

^------------------. “OFF” (Cancel) (------------------J



≥ The remaining time is indicated on the unit’s display except

when other operations are performed.

≥ The play timer and sleep timer can be used together. The

sleep timer is always the main timer on the unit.

Others

As a factory default, this unit will turn to standby mode

automatically if there is no sound and it is not being

used for approximately 20 minutes.

To cancel this function

1 Press [SETUP] repeatedly to select “AUTO OFF”.

2 Press [3, 4] to select “OFF” and then press [OK].



≥ To turn the function on, select “ON” in step 2.

≥ This setting cannot be selected when “FM” is the source.

≥ When connected to a Bluetooth

device, the function does

not work.

When “SC-HC49” is selected from a paired Bluetooth

device’s Bluetooth

menu, this unit will turn on

automatically from standby mode and establish a

Bluetooth

connection.

1 Press [SETUP] repeatedly to select “BLUETOOTH

STANDBY”.

2 Press [3, 4] to select “ON” and then press [OK].



≥ To turn the function off, select “OFF” in step 2.

Play timer

* “CD”, “USB”, “FM” and “IPOD_DOCK” can be set as the

music source.

≥ For timer music source through the port for iPhone/iPad/

iPod and USB devices, select “USB”.

Sleep timer

Auto off function

Bluetooth

standby

SC-HC49EG~RQT9886-R.book 12 ページ２０１４年４月３日　木曜日　午前９時２９分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCHC49EG Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SCHC49EG

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info