Bedienungsanleitung Panasonic SCHC57DBEB (Seite 17 von 28) (Englisch)

612856

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

RQT9709



≥ If broadcasting stations are memorised, proceed to

“To re-scan DAB/DAB+ stations” to memorise stations on

other frequency blocks. (> 15)

≥ If “SCAN FAILED” is still displayed, repeat steps 1 to 4 until a

station is memorised. If the situation does not improve, try

using an outdoor DAB antenna or consult your dealer.

∫ Checking the DAB/DAB+ signal reception

quality

1 While listening to the DAB broadcast:

Press [PLAY MENU] repeatedly to select “SIGNAL

QUALITY” and then press [OK].

≥ The current frequency block is displayed and

then the reception quality is indicated.

2 If the signal reception quality is poor, move the

antenna to a position where the reception

quality improves.

3 To continue checking the quality of other

frequency blocks

Press [3, 4] again and select the desired

frequency.

4 Press [OK] to exit.



If the antenna has been adjusted, perform auto scanning and

update the station memory. (> 15)

Only the frequencies currently used in the UK as of

February 2012 on BAND III are Auto scanned (“United

Kingdom”, factory setting).

Select “ALL BAND III” when you want to store stations

on other frequencies to memory.

1 Press [PLAY MENU] repeatedly to select “SCAN

MODE”.

2 Press [3, 4] to select “ALL BAND III” or “UNITED

KINGDOM” and then press [OK].

≥ The “DAB AUTO SCAN” begins automatically.



≥ The DAB preset channels are erased when the

“SCANMODE” is changed.

≥ If the play timer has been set and DAB/DAB+ is the music

source, the timer switches off. (> 19)

Listening to FM radio

You can preset up to 30 channels.

Preparation

Make sure that the DAB antenna is connected. (> 10)



A station previously stored is overwritten when another station

is stored in the same channel preset.

1 Press [RADIO] to select “FM”.

2 Press [PLAY MENU] repeatedly to select

“A.PRESET” and then press [OK].

3 Press [3, 4] to select “LOWEST” or “CURRENT”

and then press [OK].

LOWEST:

To begin auto preset with the lowest frequency

(FM 87.50).

CURRENT:

To begin auto preset with the current frequency.*

* To change the frequency, refer to “Manual tuning and

presetting”.

The tuner starts to preset all the stations it can receive

into the channels in ascending order.

Preparation

1 Press [RADIO] to select “FM”.

2 Press [PLAY MENU] repeatedly to select

“TUNEMODE” and then press [OK].

3 Press [3, 4] to select “PRESET” and then press

[OK].

1 Press [RADIO] to select “FM”.

2 Press [:/6] or [5/9] to select the

channel.

∫ Manual tuning and presetting

Select a radio broadcast.

1 Press [RADIO] to select “FM”.

2 Press [PLAY MENU] repeatedly to select

“TUNEMODE” and then press [OK].

3 Press [3, 4] to select “MANUAL” and then press

[OK].

4 Press [:/6] or [5/9] to tune to the

required station.

≥ To start automatic tuning, press and hold [:/6],

[5/9] until the frequency starts scrolling. Tuning

stops when a station is found.

(Continues to next page)

Changing the Auto scan

frequency range

Presetting stations

automatically

Listening to a preset channel

SC-HC57DB~RQT9709-1B.book Page 17 Friday, March 2, 2012 3:31 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCHC57DBEB Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info