Bedienungsanleitung Panasonic SCHC57DBEB (Seite 18 von 28) (Englisch)

612856

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

RQT9709

To preset the channel

5 While listening to the radio broadcast

Press [OK].

6 Press [3, 4] to select the channel and then press

[OK].

∫ To improve FM sound quality

1 While receiving FM broadcasts, press

[PLAY MENU] repeatedly to select “FM MODE”

and then press [OK].

2 Press [3, 4] to select “MONO” and then press

[OK].

≥ This setting can be preset and memorised. To do so,

continue to step 5 of “Manual tuning and presetting”.



≥ Select “STEREO” in step 2 to return to stereo broadcasts.

≥ “MONO” is cancelled if the frequency is changed.

≥ If “MONO” is selected, regardless of the type of signal this

unit is receiving, “FM MONO” is displayed. (> below)

∫ To display the current FM signal status

While receiving FM broadcast, press [DISPLAY].



“STEREO” is displayed when this unit tunes to a stereo

broadcast.

Internet Radio

This unit can output Internet radio if “vTuner for

Panasonic” is installed on your iPhone/iPod touch.

Preparation

≥ Install “vTuner for Panasonic” to your iPhone/iPod

touch.

≥ Install iOS 5.0 or later.

1 Insert the iPhone/iPod touch to this unit.

2 Press [iPod] repeatedly to select “VTUNER”.

{. “vTuner for Panasonic” starts.



≥ Visit the below website for the following information about

“vTuner for Panasonic”:

http://radio.vtuner.com/panasonic/en/

(Compatible iPhone/iPod touch models and software

versions, purchasing, installation and operation details.)

≥ A pop-up screen may appear on your iPhone/iPod touch.

Follow the indicated instructions.

Sound adjustment

The following sound effects can be added to the audio

output.

1 Press [SOUND] repeatedly to select the effect and

then press [OK].

2 Press [3, 4] to select the setting and then press

[OK].

≥ You may experience a reduction in sound quality when these

effects are used with some sources. If this occurs, turn the

sound effects off.

Clock and Timer

This is a 24-hour clock.

1 Press [SETUP] repeatedly to select “CLOCK” and

then press [OK].

2 Press [3, 4] to set the time and then press [OK].



≥ To display the clock, press [SETUP] repeatedly to select

“CLOCK” and then press [OK] once. The time is displayed for

10 seconds.

(During standby, press [iPod MENU, DISPLAY] once.)

≥ The clock is reset when there is a power failure or when the

AC mains lead is removed.

≥ Reset the clock regularly to maintain accuracy.

“FM ST”: The FM signal is in stereo.

“FM”: The FM signal is in monaural.

≥ “FM” is also displayed even if this unit is not tuned to a

station.

Direct-Vocal

Surround

(

D.SURROUND

)

“LEVEL 1”, “LEVEL 2” or “OFF”.

≥ The factory preset is “OFF”.

Preset EQ

(PRESET EQ)

“HEAVY” (heavy), “SOFT” (soft),

“CLEAR” (clear), “VOCAL”

(vocal) or “FLAT” (flat/off).

≥ The factory preset is “HEAVY”.

Bass (BASS) or

Treble (TREBLE)

Adjust the level (j4 to i4).

Dynamic Bass

(D.BASS)

“ON D.BASS” or

“OFF D.BASS”.

≥ The factory preset is

“ON D.BASS”.

Setting the clock

SC-HC57DB~RQT9709-1B.book Page 18 Friday, March 2, 2012 3:31 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCHC57DBEB Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info