Bedienungsanleitung Panasonic SCHC57DBEB (Seite 19 von 28) (Englisch)

612856

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

RQT9709

You can set the timer so this unit turns on at a certain

time every day.

Preparation

Set the clock (> 18).

∫ Setting the timer

1 Press [SETUP] repeatedly to select

“TIMER ADJ” and then press [OK].

2 Press [3, 4] to set the starting time

(“ON TIME”) and then press [OK].

3 Press [3, 4] to set the finishing time

(“OFF TIME”) and then press [OK].



≥ To display the timer settings, press [SETUP] repeatedly to

select “TIMER ADJ” and then press [OK] once.

(During standby, press [iPod MENU, DISPLAY] twice.)

≥ The music source and volume will also be displayed if the

timer is turned on. (> below)

∫ Turn the timer on

1 Select the music source*

and set the desired

volume.

2 Press [SETUP] repeatedly to select

“TIMER SET” and then press [OK].

3 Press [3, 4] to select “SET” and then press [OK].

≥ “F” is displayed.

4 Press [Í] to turn the unit off.



*1: “CD”, “USB”, “IPOD”, “DAB/DAB+” and “FM” can be set as

the music source.

≥ This unit can be used as normal after the timer is set,

however:

≥ Turn the unit to standby mode before the timer start time.

≥ Even if the audio source or the volume is changed, the

timer will still use the audio source and volume that was

set when the timer was turned on.

≥ To turn the timer off, select “OFF” in step 3.

≥ The unit will turn on at the preset time, with the volume

increasing gradually to the preset level.

The sleep timer can turn the unit off after a set time.

1 Press [SETUP] repeatedly to select “SLEEP” and

then press [OK].

2 Press [3, 4] to set the time (in minutes) and then

press [OK].

“SLEEP 30” ,. “SLEEP 60” ,. “SLEEP 90” ,. “SLEEP 120”

^------------------------. OFF (Cancel) (------------------------J

≥ The remaining time is indicated on the unit’s display except

when other operations are performed.

≥ The play timer and sleep timer can be used together. The

sleep timer always has priority.

Others

As a factory preset, this unit will always turn off

automatically if there is no sound output and no

operation for 30 minutes.

To cancel this function

1 Press [SETUP] repeatedly to select “AUTO OFF”

and then press [OK].

2 Press [3, 4] to select “OFF” and then press [OK].



≥ To turn automatic standby on, select “ON” in step 2.

≥ This setting cannot be selected when “DAB/DAB+” or “FM” is

the source.

The brightness of this unit’s display can be changed.

1 Press [SETUP] repeatedly to select “DIMMER”

and then press [OK].

2 Press [3, 4] to select “ON” and then press [OK].



To cancel the dimmer, select “OFF” in step 2.

When other Panasonic equipment responds to the

supplied remote control, change the remote control

code.

1 Press [CD] to select “CD”.

2 Press and hold [CD] on the main unit and [3] on

the remote control until the main unit’s display

shows “REMOTE 2”.

3 Press and hold [OK] and [3] on the remote control

for at least 4 seconds.



To change the mode back to “REMOTE 1”, repeat the steps

above by replacing [3] with [4].

Play timer

Sleep timer

Automatic standby

Display brightness

Changing the main unit and

remote control code

SC-HC57DB~RQT9709-1B.book Page 19 Friday, March 2, 2012 3:31 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCHC57DBEB Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info