Bedienungsanleitung Parkside IAN 285818 PDMFG 180 A1 (Seite 32 von 135) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

746155

Zoom out

Zoom in

Vorherige Seite

1/135

Nächste Seite

PDMFG 180 A1

│

29 ■

Hazards caused by vibrations

■ Vibrations can damage the nerves and cause

malfunctions to the blood circulation in the

hands and arms.

■ Keep your hands away from the ﬁttings of the

nut wrenches.

■ Wear warm clothing when working in a cold

environment and keep your hands warm and

dry.

■ If you notice that the skin of your ﬁngers or

hands is becoming numb, tingles, hurts or shows

white discolouration, stop working with the

machine and consult a doctor.

■ The automatic screwdriver must to be operated

and maintained in accordance with the recom-

mendations contained in this manual to reduce

any unnecessary increase of the vibrations.

■ Do not use any worn-out or poorly matching

ﬁttings and extensions, as there is a high prob-

ability that this will lead to a signiﬁcant increase

in the vibrations.

■ Consumables and the machine tool should be

selected, maintained and replaced in accor-

dance with the recommendations in this guide

in order to avoid unnecessary increase of oscil-

lations.

■ If possible, sleeve ﬁttings should be used.

■ To support the weight of the machine, use a

stand, clamp or a balancing unit wherever

possible.

■ Hold the machine securely but not too ﬁrmly

while maintaining the necessary hand-reaction

force, as the vibration risk generally increases

the harder the machine is held.

■ An inadequately mounted or damaged acces-

sory tool can lead to excessive vibrations.

Additional safety instructions for

pneumatic machines

■ Compressed air can cause serious injury.

– When the machine is not in use, the air

supply must always be shut oﬀ and the air

hose depressurised. The machine must be

disconnected from the compressed air sup-

ply before replacing accessories or when

conducting repair work.

– Never aim the airﬂow at yourself or anyone

else.

■ Thrashing hoses can cause serious injury. There-

fore, always check whether the hoses and their

ﬁxings are undamaged and have not come

loose.

■ Cold air must be directed away from the hands.

■ Do not use any quick-lock couplings on the tool

inlet for impact and impulse drills. For hose con-

nections with a thread, always only use those

made of tempered steel (or a material with

comparable impact resistance).

■ If universal rotary joints (claw couplings) are

used, locking pins must be inserted and Whip-

check hose restraints must be used to provide

protection in the case of a failure of the connec-

tion between the hose and the machine.

■ Ensure that the maximum permissible pressure

on the machine is not exceeded.

■ For torque-controlled machines with continuous

rotation, the air pressure has eﬀects on per-

formance that are relevant in terms of safety.

Requirements for the length and diameter of the

hose must therefore be deﬁned.

■ Never carry pneumatic machines by the hose.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 285818 PDMFG 180 A1 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info