Bedienungsanleitung Parkside IAN 285818 PDMFG 180 A1 (Seite 30 von 135) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

746155

Zoom out

Zoom in

Vorherige Seite

1/135

Nächste Seite

PDMFG 180 A1

│

27 ■

■ Use personal protective equipment. Always

wear eye protection. Wearing personal pro-

tective equipment such as protective gloves,

non-slip safety shoes or hearing protection,

depending on the type and use of the power

tool reduces the risk of personal injuries and it is

recommended.

■ The permissible speed of the accessory tool

used must be at least as high as the maximum

speed speciﬁed for the compressed air tool.

Accessories that rotate faster than permissible

can break and become airborne.

■ Wear a safety helmet for overhead work.

■ The tool will run on after the compressed air

tool has been switched oﬀ.

■ Ensure that no hazard is caused by sparks

created during use. Explosive or ﬂammable

dusts can be created when processing certain

materials. There is a risk of explosion or ﬁre.

Hazards caused by repetitive move-

ments

■ Users of an automatic screwdriver may experi-

ence unpleasant sensations in their hands, arms,

shoulders, neck area or other body parts while

working with the tools.

■ Assume a comfortable position when working

with this machine, pay attention to safe footing

and avoid unfavourable positions or such that

make it diﬃcult to keep your balance. During

work over longer periods, the operator should

change posture to avoid discomfort and fatigue.

■ If the operator notices symptoms such as persis-

tent discomfort, throbbing, pain, tingling, burn-

ing or stiﬀness, these warning indications should

not be ignored. The operator should consult a

qualiﬁed medical doctor.

Hazards caused by accessories

■ Disconnect the machine from the energy supply

before changing the machine tool or accessory.

■ Do not touch ﬁttings or accessories during the

striking process because this can increase the

risk of cuts, burns or injuries caused by vibra-

tions.

■ Avoid direct contact with the accessory tool

during and after use because it may be hot or

have sharp edges.

■ Use only accessories and supplies of the sizes

and types recommended by the manufacturer

of machines for screw connections; do not use

any other types or sizes of accessories or con-

sumable materials.

■ Use only impact ﬁttings that are in good working

order because any defects in the handles and

accessories can cause these to break and be

ejected when used with impact wrenches.

■ The permissible speed of the accessory tool

used must be at least as high as the maximum

speed speciﬁed for the compressed air tool.

Accessories that rotate faster than permissible

can break and become airborne.

■ Never ﬁt a grinding disc, cutting disc or milling

cutter. A bursting grinding disc can lead to seri-

ous injuries or death.

■ Do not use discs that are damaged, cracked or

have been dropped.

■ Only approved accessory tools with the appro-

priate shaft diameter may be used.

■ Observe the manufacturer's recommendation

for small grinding tools. The maximum permissi-

ble protrusion (L0 = length of the shaft between

the collet chuck end and the small grinding

tool) speciﬁed by the manufacturer must not be

exceeded when using small grinding tools! If

the protrusion (L0) is increased, the permissible

rotation speed must be lowered. Wherever pos-

sible, insert the complete length of the shaft of

the accessory tool into the collet chuck. Ensure

that the clamping length (Lg) is at least 10 mm.

■ The shaft diameter of the accessory tool must

exactly match the clamp bore of the collet chuck!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 285818 PDMFG 180 A1 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info