Bedienungsanleitung Parkside IAN 285818 PDMFG 180 A1 (Seite 29 von 135) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

746155

Zoom out

Zoom in

Vorherige Seite

1/135

Nächste Seite

PDMFG 180 A1

■ 26

│

■ Ensure that no dangers are created for other

persons either.

Hazards caused by entanglement

■ Hazards caused by entanglement can result

in suﬀocation, scalping and/or cut wounds if

loose clothing, personal jewellery, necklaces,

hair or gloves are not kept away from the

machine and its accessories.

■ Gloves can get caught in the rotating drive,

which can lead to injuries or fractures of the

ﬁngers.

■ Rubber or metal-reinforced gloves can become

entangled easily in rotating drive ﬁttings and

extensions.

■ Never wear loose-ﬁtting gloves or gloves with

cut-oﬀ or worn-out glove ﬁngers.

■ Never hold onto the drive, the ﬁtting or the drive

extension.

■ Keep your hands away from the rotating drive.

■ Dress properly. Do not wear loose clothing or

jewellery. Keep hair, clothing and gloves away

from the compressed air tool and moving parts.

Loose clothes, jewellery or long hair can be

caught in moving parts. There is a risk of per-

sonal injury.

■ Always wear impact-resistant safety goggles

during operation, repair or maintenance work

and when replacing accessory parts on the drill

or thread cutter. The level of the required pro-

tection must be evaluated separately for each

individual task.

Hazards during operation

■ When using the machine, the operator's hands

may be exposed to risks such as crushing,

striking, cutting, abrasion and heat. Wear

suitable gloves to protect your hands.

■ Avoid contact with the rotating shaft and the

accessory tool to prevent cuts on your hands

and other body parts.

■ The operator and maintenance personnel must

be physically capable of handling the size,

weight and power of the machine.

■ Hold the machine correctly: be ready to counter-

act any normal or sudden movements – keep

both hands ready.

■ Ensure that your body is balanced and that you

have stable footing.

■ Keep proper footing and balance at all times.

■ High reaction torques can occur in the event

of a jam/blockage, which can be caused by

excessive loads working on the drill, jamming of

the drill in the work material being processed or

by the drill cutting through the material.

■ Prevent unintentional starting. If the air supply is

interrupted, switch oﬀ the compressed air tool

on the On/Oﬀ switch.

■ When aids are needed to absorb the reaction

torque, we recommend using a suspension unit

wherever possible. If this is not possible, side

handles for machines with a straight grip and

machines with pistol grip are recommended.

We recommend always using aids to absorb

the torque if it is higher than 4 Nm on machines

with straight grips, and higher than 10 Nm on

machines with a pistol grip, and higher than

60 Nm on oﬀset screwdrivers.

■ Release the start/stop control in case of a

disruption to the electricity supply.

■ Use only the lubricants recommended by the

manufacturer.

■ Fingers might be crushed in nut wrenches with

an open pan head.

■ Keep your hands away from the rotating collet

chuck and the rotating drill.

■ Do not use the tool in conﬁned spaces and en-

sure that your hands are not crushed between

the machine and the work piece, especially

when removing screws.

■ Safety goggles must be worn. The wearing of

protective gloves and safety clothing is recom-

mended.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 285818 PDMFG 180 A1 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info