Bedienungsanleitung Parkside IAN 285818 PDMFG 180 A1 (Seite 31 von 135) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

746155

Zoom out

Zoom in

Vorherige Seite

1/135

Nächste Seite

PDMFG 180 A1

■ 28

│

Hazards in the workplace

■ Slipping, tripping up and falling are the main

causes of injuries in the workplace. Pay atten-

tion to surfaces that may have become slippery

from the use of the machine and also be aware

of tripping hazards caused by air or hydraulic

hoses.

■ Proceed with caution in unknown surroundings.

Hidden hazards caused by power or other sup-

ply lines may be present.

■ This compressed air tool is not suitable for use

in explosive atmospheres and is not insulated

against contact with power sources.

■ Ensure that there are no electric mains, gas

pipes, etc. that might result in a hazard if dam-

aged by using the machine.

■ Make sure (e.g. by using a metal detector) that

there are no hidden power, water or gas lines in

the location where you are working.

Hazards caused by dust and vapours

■ The dusts and vapours produced by using the

machines for screw connections can be hazard-

ous to health (e.g. cause cancer, birth defects,

asthma and/or dermatitis); it is essential to

carry out a risk assessment in respect of these

risks and to implement corresponding regula-

tory mechanisms.

■ The risk assessment should include the dust

caused by using the machine and any existing

dust that may be raised at the same time.

■ The exhaust air should be extracted so that the

minimum amount of dust is raised in an already

dusty environment.

■ If dusts or vapours are created, the main priority

must be to control these at the site of their release.

■ All machine components or accessories in-

tended for collecting, extracting or suppressing

airborne dust or vapours or should be used and

serviced properly in accordance with the manu-

facturer’s instructions.

■ Consumables/machine tools should be se-

lected, maintained and replaced in accordance

with the recommendations in this guide in order

to avoid unnecessary intensiﬁcation of dust or

vapour production.

■ Use a dust mask as per the instructions provided

by your employer or as required by health and

safety regulations.

■ Working with certain materials can lead to

emissions of dust and vapours that are poten-

tially explosive.

Hazards caused by noise

■ Excessive noise levels in conjunction with insuﬃ-

cient hearing protection may lead to permanent

hearing damage, loss of hearing and other

problems, such as tinnitus (ringing, buzzing,

whistling or humming in your ears). It is essential

to carry out a risk assessment with regard to

these hazards and implement suitable control

mechanisms.

■ Suitable control mechanisms include measures

such as the use of insulating materials to avoid

ringing noises from occurring on the work-

pieces.

■ Use hearing protection according to the instruc-

tions provided by your employer and as re-

quired by work and health safety regulations.

■ The automatic screwdriver is to be operated

and maintained in accordance with the recom-

mendations contained in this manual in order to

reduce any unnecessary increase of the noise

levels.

■ If the automatic screwdriver is equipped with

a sound absorber, it must always be available

and in good working order when using the

automatic screwdriver.

■ Consumables and the machine tool should

be selected, maintained and replaced in ac-

cordance with the recommendations in these

instructions in order to avoid any unnecessary

increase of the noise levels.

■ The compressed air tool is to be operated and

maintained in accordance with the recommen-

dations contained in these instructions in order

to reduce any unnecessary increase of the noise

levels.

■ The integrated sound absorber may not be

removed and must be in good working order.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 285818 PDMFG 180 A1 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info