748012
23
Zoom out
Zoom in
Vorherige Seite
1/87
Nächste Seite
PEH 30 C3
GB
IE
 19
External extraction:
When using dust extraction systems, e.g. a work-
shop extractor, it may be necessary to use the
adapter for external extraction
. The vacuum
cleaner must be suitable for the material being
processed.
Connecting:
Push the adapter for external extraction
firmly into the chip ejector .
Push the hose of a suitable dust extraction ap-
pliance (e.g. a workshop vacuum cleaner) onto
the chip ejector
(or the adapter for external
extraction , if required).
Removal:
Pull the hose of the vacuum cleaner off the chip
ejector
or the adapter.
Pull the adapter for external extraction
off.
Parking shoe (see fig. B)
The parking shoe allows you to put down the
appliance without risking damage to the work-
piece. While working, the parking shoe is
flipped up and rear part of the plane sole is
exposed.
Planing
CAUTION! RISK OF KICKBACK!
Always switch the appliance on before applying
it to the workpiece.
Set desired cut depth.
Switch the appliance on.
Place the appliance with the front part of the
plane sole
on the workpiece.
Move the appliance with straight, even motions
over the workpiece.
Push forward slowly and do not exert excessive
pressure on the plane sole
. Excessive speed
reduces the surface finish and can lead to a jam
in the chip ejector.
Chamfering edges
The V grooves in the front plane sole allow
easy chamfering of workpiece edges.
Use the V groove that corresponds to the chamfer
width required.
Place the planer with the V groove
onto the
workpiece edge and guide it forwards.
Using the rip fence
The fit the rip fence, guide the connecting screw
8b
through the connecting piece
8a
and the rip
fence .
Screw the lock nut
onto the connecting
screw
8b
.
Fit the rip fence
onto the appliance using the
fastening screw .
Undo the lock nut
and set the desired width.
Retighten the lock nut
.
Ensure that the plane is applied with lateral
pressure.
Using the fold depth stop
Fit the fold depth stop onto the appliance
using the fastening screw
.
Set the desired fold depth using the fold depth
stop
.
Repeat the planing process several times until
the required fold depth is achieved.
Removing/replacing the planing
blade (see figs. C + D)
WARNING! RISK OF INJURY
Always remove the plug from the power
socket before working on the appliance.
CAUTION!
There is a risk of injury due to the cutting edges
of the planing blade
!
Never touch the planing blade on its cutting
edges.
The planing blade has two cutting edges and
can be turned.
23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Parkside IAN 291791 PEH 30 C3 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info