Bedienungsanleitung Parkside IAN 292167 PDSS 16 A1 (Seite 19 von 90) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

746866

Zoom out

Zoom in

Vorherige Seite

1/90

Nächste Seite

PDSS 16 A1

■ 16

│

■ Please ensure that you have read and understood

the safety instructions before ﬁtting, operating,

repairing, servicing or replacing any accesso-

ries and before working near the compressed

air tool. Failure to do this can result in serious

bodily injury.

■ The compressed air tool should only be set up,

adjusted or used by adequately qualiﬁed and

trained operators.

■ The compressed air tool may not be modiﬁed.

Modiﬁcations can reduce the eﬀectiveness of

the safety measures and increase the risks for

the operator.

■ Never use damaged compressed air tools.

Maintain compressed air tools with care. Check

regularly whether moving parts function correctly

and do not jam; check whether any parts are

broken or damaged to an extent that the com-

pressed air tool will no longer operate correctly.

Check signs and labels for completeness and

readability. If damaged, have parts repaired or

replaced before using the compressed air tool.

Many accidents are caused by poorly main-

tained compressed air tools.

Hazards caused by ﬂying parts

■ If a workpiece or accessory of the compressed

air tool breaks, parts can be ﬂung out at high

speeds.

■ Always wear impact-resistant safety goggles

during operation, when replacing accessory

parts or during repair or maintenance of the

compressed air tool. The level of the required

protection must be evaluated separately for

each individual task.

■ You must ensure that the workpiece has been

securely ﬁxed in place.

■ Check regularly that the rotation speed of

the compressed air tool is not higher than the

speciﬁed rotation speed appended on the

compressed air tool. These rotation speed tests

must be conducted without any accessory tools

attached.

■ Ensure that sparks and fragments created during

work do not constitute a hazard.

■ Separate the compressed air tool from the com-

pressed air supply before replacing the attach-

ment or accessories or before you adjust the

settings, service or clean the tool.

■ Ensure that no dangers are created for other

persons either.

Hazards caused by entanglement

■ Dress properly. Do not wear loose clothing or

jewellery. Keep hair, clothing and gloves away

from the compressed air tool and moving parts.

Loose clothes, jewellery or long hair can be

caught in moving parts. There is a risk of per-

sonal injury.

Hazards during operation

■ Avoid contact with the rotating shaft and the

accessory tool to prevent cuts on your hands

and other body parts.

■ When using the machine, the operator's hands

can be subject to hazards such as cuts, grazing

and heat. Wear suitable gloves to protect your

hands.

■ The operator and maintenance personnel must

be physically capable of handling the size,

weight and power of the compressed air tool.

■ Hold the compressed air tool correctly:

be ready to counteract any normal or sudden

movements – keep both hands ready.

■ Keep proper footing and balance at all times.

■ Prevent unintentional starting. If the air supply is

interrupted, switch oﬀ the compressed air tool

on the On/Oﬀ switch.

■ Use only the lubricants recommended by the

manufacturer.

■ Use personal protective equipment. Always

wear eye protection. Wearing personal pro-

tective equipment such as protective gloves,

non-slip safety shoes or hearing protection,

depending on the type and use of the power

tool reduces the risk of personal injuries and it is

recommended.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 292167 PDSS 16 A1 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info