746866
21
Zoom out
Zoom in
Vorherige Seite
1/90
Nächste Seite
PDSS 16 A1
18 
GB
IE
Hazards in the workplace
Slipping, tripping up and falling are the main
causes of injuries in the workplace. Pay atten-
tion to surfaces that may have become slippery
from the use of the compressed air tool and
tripping hazards caused by air or the hydraulic
hose.
Proceed with caution in unknown surroundings.
Hidden hazards caused by power or other
supply lines may be present.
This compressed air tool is not suitable for use
in explosive atmospheres and is not insulated
against contact with power sources.
Make sure (e.g. by using a metal detector) that
there are no hidden power, water or gas lines
in the location where you are working.
Hazards caused by dust and vapours
The dusts and vapours produced by using the
machines for screw connections can be hazard-
ous to health (e.g. cause cancer, birth defects,
asthma and/or dermatitis); it is essential to
carry out a risk assessment in respect of these
risks and to implement corresponding regula-
tory mechanisms.
The risk assessment should include the dust
caused by using the machine and any existing
dust that may be raised at the same time.
The compressed air tool is to be operated and
maintained in accordance with the recommen-
dations contained in this manual to keep the
release of dust and vapours to a minimum.
The exhaust air should be extracted so that the
minimum amount of dust is raised in an already
dusty environment.
If dusts or vapours are created, the main priority
must be to control these at the site of their re-
lease.
All components of the compressed air tool or
accessories intended for collecting, extracting
or suppressing airborne dust or vapours or
should be used and serviced properly in ac-
cordance with the manufacturer’s instructions.
Consumables/tools should be selected, main-
tained and replaced in accordance with the
recommendations in this guide in order to avoid
unnecessary intensification of dust or vapour
production.
Use a dust mask as per the instructions provided
by your employer or as required by health and
safety regulations.
Working with certain materials can lead to
emissions of dust and vapours that are poten-
tially explosive.
Hazards caused by noise
Excessive noise levels in conjunction with insuffi-
cient hearing protection may lead to permanent
hearing damage, loss of hearing and other
problems, such as tinnitus (ringing, buzzing,
whistling or humming in your ears).
It is essential to carry out a risk assessment with
regard to these hazards and implement suitable
control mechanisms.
Suitable control mechanisms include measures
such as the use of insulating materials to avoid
ringing noises from occurring on the work-
pieces.
Use hearing protection as required by work and
health safety regulations.
The compressed air tool is to be operated and
maintained in accordance with the recommen-
dations contained in these instructions in order
to reduce any unnecessary increase of the noise
levels.
Consumables and the tool should be selected,
maintained and replaced in accordance with
the recommendations in these instructions in
order to avoid any unnecessary increase of the
noise levels.
The integrated silencer may not be removed
and must be in good working order.
21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Parkside IAN 292167 PDSS 16 A1 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info