Bedienungsanleitung Parkside IAN 310320 PLV 1500 A1 (Seite 24 von 124) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Polnisch)

748155

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

GB IE

ensures that the equipment re-

mains safe.

• Before starting the equipment, en-

sure that no objects or branches

are pushed into the blade open-

ing, that the equipment is stand-

ing stably and that the work-

space is tidy and not blocked.

Check the condition of your ex-

tension cable and the connecting

cable of your equipment. Use the

necessary protective equipment.

There is a risk of injury.

• If your equipment vibrates or emits

unusual noises when switched

on, disconnect the plug from

the socket and check the cutting

cylinder. Ensure that no remains

of chopped matter are blocking

the cutting cylinder or jammed



problems, return the equipment to

a customer service centre.

• If the blades no longer cut cor-

rectly or if the motor is over-

loaded, check all the parts of

your equipment and replace the

worn parts. If a more extensive

repair is required, contact a cus-

tomer service centre.

Use:

• CAUTION – A very sharp tool.



toes. While working always



away from the cutting cylinder

and the ejector opening. There

is the danger of serious injury!

• Do not operate the implement

while it is raining, in poor weather

conditions and when the surround-

ing area and lawn are wet. Op-

erate the implement only during

daylight hours or with bright light-

ing. There is a risk of accidents.

• Do not operate the implement if

you are tired or are lacking in

concentration and after having

drunk alcohol or taken medi-

cine. Always take a work break

in due time. Approach the work

with common sense. A moment

of carelessness when using the

equipment can result in serious

injury.

• Familiarize yourself with the

terrain and remain focused on

the potential hazards that you

could miss on account of the

motor noise.

• Always maintain a secure foot-

ing while working, especially

on a sloping terrain. Always

work across slopes - never up

and down! Be particularly care-

ful when changing the travelling

direction. Do not work on very

steep slopes. This enables you

to control the equipment better

in unexpected situations.

• Avoid an abnormal body posture.

• Always guide the implement at

a walking pace with both hands

on the handle. Be especially

careful when you turn the imple-

ment around or draw it towards

you. Danger of stumbling!

• Start or actuate the starting lever

with care and in conformity with

the directions in these Instructions.

• Do not tilt the implement when

starting, other than it has to be

lifted. In this case tilt the imple-

ment only to the extent that is ab-

solutely necessary and always

lift the implement on the side that

is opposite to the operator.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 310320 PLV 1500 A1 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info