748155
25
Zoom out
Zoom in
Vorherige Seite
1/124
Nächste Seite
25
GB IE
Never operate the implement
without the attached collection
bag or impact protector. Dan-
ger of injury! Always keep well
away from the ejector opening.
Do not operate the implement in
-
uids or gases as this could give

explosion.
Always disconnect the plug from
the mains socket before working.

After the implement has been
turned off, the cutting cylinder
will continue to rotate for a few
seconds. Keep hands and feet
well away.
Do not touch the spring tines be-
fore the implement has been dis-
connected from the mains and
the spring tines have come to a
complete standstill. Risk of injury
owing to a sharp implement!
Only remove plant parts when the
implement is standing completely
still. Ensure that the grass ejec-
tor opening is clean and free.
Switch off the power when the
implement is to be transported,
lifted or tilted and when travers-
ing other surfaces than grass.
Children must never play with
the device.
Always switch off the implement
and disconnect the power plug:-
- Whenever you leave the im-
plement
- Before you clean the ejector
opening or unblock or unclog
the implement
- When the implement is not
being used
- During all maintenance and
cleaning work
- When the power cable is dam-
aged or has become tangled
- When the implement hits an
obstruction during work or
when unusual vibrations arise.
Establish the cause and see if
the implement has been dam-
aged. Do not repair it yourself!
Have the implement repaired
by an authorised workshop!
Store the implement in a dry
place well out of reach of
children.
CAUTION! The following
states how to avoid damage
to the implement and any re-
sulting harm to people:

Switch off the power when
the implement is to be carried
across steps.
Inspect the implement each time
before it is to be used. Never
operate the implement if safety
devices (e.g. impact protector,
parts of the cutting facility or
bolts are missing, worn out or
damaged. Check especially the
power cable and starting lever
for damage. To avoid imbal-
ance, all tools and bolts must be
exchanged as complete sets.
Only use spare parts and acces-
sories that have been supplied
or recommended by the manu-
facturer. The use of alien parts
results in the immediate loss of
all guarantee claims.
Ensure that all nuts, bolts and

25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Parkside IAN 310320 PLV 1500 A1 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info