Bedienungsanleitung Parkside IAN 310320 PLV 1500 A1 (Seite 26 von 124) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Polnisch)

748155

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

GB IE

that the implement is in a safe

working state.

• Never try to repair the imple-

ment yourself, other than you

have been trained accordingly.

All work that has not been listed

in these Instructions must only be

carried out by authorised servic-

ing agencies.

• Treat the implement with the

greatest care. Always keep the

tool clean for better and safer

work. Follow the maintenance

instructions.

• Never overload the implement.

Always work within the speci-



low-power machines for heavy-

duty work. Do not operate the

implement for purposes for

which it is not intended.

Electrical safety:

CAUTION! The following states

how to avoid accidents and

injuries due to electric shock:

• Before each use, carry out a vis-

ual inspection of the power and

extension cables for signs of

damage or ageing. Damaged

mains power cables increase

the risk of electric shock.

• Connect the implement to a pow-

er socket with a residual-current

circuit breaker that has a rated

current of not more than 30 mA.

• Always keep the extension cable

well away from the cutting tools.

Should the power cable become

damaged during work, then

instantly disconnect the power

cable from the mains. DO NOT

TOUCH THE POWER CABLE

BEFORE IT HAS BEEN DISCON-

NECTED FROM THE MAINS!

Risk of electric shock.

• If the power cable for this equip-

ment is damaged, it must be

replaced by the manufacturer,

a customer service agent of the

-

son in order to prevent hazards.

• Keep the extension cables away

from the sprung tines. The tines

may damage the cables and

result in contact with live parts.

• Check that the mains voltage

is the same as indicated on the

rating plate.

• Avoid body contact with

earthed parts (e.g. metal fences,

metal posts). There is an in-

creased risk of electric shock if

your body is earthed.

• Only use approved extension

cables of the type H05RN-F with

a maximum length of 75 m and

which have been approved for

open-air use. The stranded cord

diameter of the extension cable

must be at least 2.5 mm

. Al-

ways unreel a cable drum to its

full length so that the entire ca-

ble can be checked for damage.

• Use the envisaged cable suspen-

sion when attaching an exten-

sion cable.

• Never pull the cable to discon-

nect the plug from the socket.

Protect the cable from heat, oil

and sharp edges.

• If the connecting cable is dam-

-

sion cable from the socket. You

can then disconnect the connect-

ing cable of the equipment.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 310320 PLV 1500 A1 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info