Bedienungsanleitung Parkside IAN 73791 PDMT 6.2 A1 (Seite 38 von 44) (Deutsch, Englisch, Holländisch)

745111

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

38 GB

Safety information for air tools

mind that surfaces may have become slippery

during machine use, and remember tripping

hazards caused by the air- or hydraulic hose.

Proceed with caution in unfamiliar surroundings.

There may be hidden dangers due to electrical

cables or other supply lines.

This machine for grinding and sawing is not

suitable for use in explosive environments and

is not insulated against contact with electrical

power sources. Therefore, it may not come into

contact with electrical power sources!

Verify that there are no electrical lines, gas lines,

etc. that may result in a hazard in the event of

them becoming damaged during machine use.

Hazards due to dust and

vapours

Dusts and vapours generated by the use of

machines for screw connections may result in

damage to health (e.g. cancer, birth defects,

asthma and / or dermatitis); it is imperative to

perform a risk assessment for these hazards and

implement the respective regulatory mechanisms.

The risk assessment should include dust genera-

ted by machine use and the dust already present

in the area, which is possibly being blown around.

The machine for grinding and cutting must be

operated and maintained as recommended in

these instructions to minimise the creation of

dust and vapour.

Exhaust air must be discharged in such a way

that the amount of dust being blown about in a

dusty environment is minimised.

If dust or vapours are generated, the principal

task must be to control them in the area where

they are released.

All machine mounting parts or accessories inten-

ded to collect, extract or eliminate airborne dust

or vapours should be used and maintained

according to manufacturer instructions.

Select, maintain and replace consumables /

machine tools as recommended in these instruc-

tions to prevent an unnecessary increase in the

production of dust or vapours.

Use respiratory protection equipment (if appli-

cable according to employer instructions or) as

required by environmental health regulations.

Noise hazards

With inadequate ear protection, the impact of

high noise levels may result in permanent hearing

damage, hearing loss and other problems, e.g.

tinnitus (ringing, whistling or buzzing in the ear).

It is imperative to perform a risk assessment for

these hazards and implement the suitable regu-

latory mechanisms.

Suitable regulatory mechanisms to minimise the

risk include measures such as using insulation to

prevent pinging sounds on work pieces.

Use ear protection (if applicable according to

employer instructions and) as required by labour-

and health regulations.

The machine must be operated and maintained

as recommended in these instructions to prevent

an unnecessary increase in the noise level.

Select, maintain and replace consumables and

machine tools as recommended in these instruc-

tions to prevent an unnecessary increase in the

noise level.

Ensure that if the machine is equipped with a

silencer this is always in place and functional

when the machine is operated.

Hazard due to vibration

Exposure to vibration may cause damage to

the nerves and disturb blood circulation in hands

and arms.

When working in cold environments wear warm

clothes and keep hands warm and dry.

If you notice your skin on ﬁngers or hands be-

coming numb, tingling, hurting or becoming

white,

stop working with the machine (if necessary,

notify your employer) and consult a physician.

Operate and maintain the machine for grinding

and cutting as recommended in this manual to

prevent an unnecessary increase in vibration.

Hold the machine ﬁrmly, but not too tightly,

maintaining the necessary hand reaction

Safety information for air tools / Before initial use / Commissioning

73791_Druckluft-Multitool_content_LB1 (nur NL).indd 38 11.05.12 17:56

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 73791 PDMT 6.2 A1 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info