764032
38
Zoom out
Zoom in
Vorherige Seite
1/132
Nächste Seite
37 GB/IE
Cleaning
¾Never allow fluids to get into the product.
¾The product must always be kept clean, dry
and free from oil or grease. Remove debris
from it after each use and before storage.
¾Regular and proper cleaning will help ensure
safe use and prolong the life of the product.
¾Clean the product with a dry cloth. Use a
soft brush for areas that are hard to reach.
¾In particular clean the air vents after every
use with a cloth and soft brush.
¾The vents must always be clear.
NOTE
uDo not use chemical, alkaline, abrasive
or other aggressive detergents or
disinfectants to clean this product as they
might be harmful to its surfaces.
Maintenance
¾The product is maintenance-free.
¾Before and after each use, check the product
and accessories (e.g. accessory tools) for
wear and damage. If required, exchange
them for new ones as described in this
instruction manual. Observe the technical
requirements (see “Technical data”).
Repair
This product does not contain any parts that can
be repaired by the user. Contact an authorised
service centre or a similarly qualified person to
have it checked and repaired.
Storage
¾Push the rotation control switch 5 to the
centre position to lock the on/off switch 6.
¾Clean the product as described above.
¾Store the product and its accessories in a
dark, dry, frost-free, well-ventilated place.
¾Always store the product in a place that is
inaccessible to children. The ideal long term
storage (longer than 3 months) temperature
is between +20 and +26 °C.
¾Guide the drill bit into the bit holder 8.
¾Store the product in its carrying case
19
.
Battery pack advice
¾Only store the battery pack
10
partially
charged. The battery pack should be
charged to 40 to 60 % (red and orange LED
in the charge indicator
14
light up) before
storing for extended periods.
¾Check the battery pack
10
charge about
every 3 months when storing for extended
periods. Recharge as necessary.
Transportation
¾Push the rotation control switch 5 to the
centre position to lock the on/off switch 6.
¾Transport the product in its carrying case
19
.
¾Protect the product from any heavy impact
or strong vibrations which may occur during
transportation in vehicles.
¾Secure the product to prevent it from slipping
or falling over.
38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Parkside PABSP 20-Li B2 - IAN 322691 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info