764032
36
Zoom out
Zoom in
Vorherige Seite
1/132
Nächste Seite
35 GB/IE
2nd gear:
Suitable for: Drilling
Speed: High
Torque: Low
Setting the rotating direction
m ATTENTION! RISK OF PRODUCT
DAMAGE!
Do not operate the rotation direction
switch 5 until the product has come to
a standstill.
¾Change the direction of rotation by pressing
the rotation direction switch 5 towards the
left or right (fig. G).
¾When the rotation direction switch 5 is in
the middle position, the on/off switch 6 is
locked.
Torque control
This product is equipped with a torque control that
disengages the spindle when a predefined torque
is exceeded.
¾The torque can be adjusted by turning the
torque sleeve 3 (fig. H).
¾Small screws or soft materials: Select a low
level.
¾Large screws, hard materials or removing
screws: Select a high level.
¾For drilling operation: Turn the torque sleeve
3 to the position.
Switching on and off
NOTE
The on/off switch 6 cannot be locked.
¾Switching on: Press and hold the on/off
switch 6.
Regulate the speed as required (see “Speed
control”) (fig. I).
¾Switching off: Release the on/off switch
6.
Speed control
¾By using the on/off switch 6, you can
progressively control the speed:
Pressure Speed
Gentle pressure: Lower speed
Greater pressure: Higher speed
LED work light
This product is equipped with a LED work light
11
to illuminate the immediate working area to
improve visibility in poorly lit areas.
¾The LED work light
11
lights up automatically
as soon as the product is switched on.
NOTE
uThe LED work light
11
stays on for an
additional approx. 10 seconds after
switching off the product.
Trial run
NOTE
uAlways carry out a no-load trial run before
starting work and after every accessory
tool replacement. Switch the product off
immediately if the accessory tool is not
running smoothly, if considerable vibration
occurs or if you hear abnormal noises.
36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Parkside PABSP 20-Li B2 - IAN 322691 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info