Bedienungsanleitung Parkside PDSS 310 A1 - IAN 96878 (Seite 38 von 45) (Deutsch, Englisch, Holländisch)

595413

Zoom out

Zoom in

Vorherige Seite

1/45

Nächste Seite

38 GB

Safety instructions for air tools / Commissioning

Safety instructions for air tools

Risks associated with

accessories

Disconnect machine from the power supply be-

fore changing a tool or accessory.

Do not touch collets or accessories whilst impact

driving, as doing so may increase the risk of

cuts, burns or injuries from vibration.

Only use the size and types of accessories and

consumables recommended by the manufacturer

of the machine.

Only use impact sockets in good working con-

dition as manual sockets and accessories in

poor working condition may break and be

ejected when used with impact drivers.

Hazards in the work

environment

Slipping, tripping and falls are main causes of

injuries at the workplace. Be mindful of surfaces

which may have become slippery during ma-

chine use, and of tripping hazards caused by

the air- or hydraulic hose.

Proceed with caution in unfamiliar surroundings.

These may hold hidden dangers due to electri-

cal cables or supply lines.

The machine for screw connections is not suita-

ble for use in explosive environments and is not

insulated against contact with electrical power

sources.

Verify there are no electrical lines, gas lines,

etc. which may result in a hazard in the event

they are damaged during machine use.

Hazards due to dust

and vapours

Dusts and vapours generated by use of machines

for screw connections may result in damage to

the health (e.g. cancer, birth defects, asthma

and / or dermatitis); it is imperative to perform

a risk assessment for these hazards and imple-

ment the respective regulatory mechanisms.

The risk assessment should include dust genera-

ted from machine use and dust in the area pos-

sibly being blown around.

Exhaust air must be discharged so the amount

of dust being blown about in a dusty environ-

ment is minimised.

If dust or vapours are generated the principal

task must be to monitor them in the area where

they are released.

All machine mounting parts or accessories in-

tended to collect, extract or eliminate airborne

dust or vapours should be used and maintained

according to manufacturer instructions.

Use respiratory dust equipment as required by

labour- and health regulations.

Noise hazards

With inadequate ear protectors the impact of

high noise levels may result in permanent hea-

ring damage, hearing loss and other problems,

e.g. tinnitus (ringing, whistling or buzzing in the

ear).

It‘s imperative to perform a risk assessment for

these hazards and implement the suitable regu-

latory mechanisms.

Suitable regulatory mechanisms to minimise the

risk include measures such as using insulation

to prevent pinging sounds on work pieces.

Use heating protection as required by labour-

and health regulations.

The machine for screw connections must be

operated and maintained as recommended in

these instructions to prevent an unnecessary in-

crease in the noise level.

If the machine for screw connections features

a silencer, always ensure it is available when

using the machine for screw connections and in

good working order.

Select, maintain and replace consumables and

machine tools as recommended in these instruc-

tions to prevent an unnecessary increase in the

sound level.

96878_par_Druckluft-Schlagschrauber PDSS 310 A1_content_DE_AT_NL.indd 38 23.04.14 15:55

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PDSS 310 A1 - IAN 96878 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside PDSS 310 A1 - IAN 96878

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info