Bedienungsanleitung Parkside PDSS 310 A1 - IAN 96878 (Seite 39 von 45) (Deutsch, Englisch, Holländisch)

595413

Zoom out

Zoom in

Vorherige Seite

1/45

Nächste Seite

39 GB

Safety instructions for air tools / Commissioning

Safety instructions for air tools

Hazard due to vibration

Exposure to vibration may cause damage to

the nerves and disturb blood circulation in hands

and arms.

Keeps hands away from the sockets of hex nut

drivers.

Wear warm clothes when working in cold envi-

ronments and keep hands warm and dry.

If you notice your skin on ﬁngers or hands beco-

ming numb, tingling, hurting or becoming white,

stop working with the machine and consult a

physician.

Operate and maintain the machine for screw

connections as recommended in this manual to

prevent an unnecessary increase in vibration.

Do not use work or poorly ﬁtting sockets or ex-

tensions, as these are very likely to signiﬁcantly

increase vibration.

Select, maintain and replace consumables and

machine tools as recommended in these in-

structions to prevent an unnecessary increase

in vibration.

When possible use socket ﬁttings.

Whenever possible, use a stand, clamp or an

equaliser to support the weight of the machine.

Do not grip the machine too tightly but ﬁrmly,

maintaining the necessary hand reaction forces,

as the vibration hazard typically increases when

tightening the grip.

Additional safety instructions

for pneumatic machinery

Compressed air can result in serious injuries.

- Always close the air supply, release pressure

from the hose, and disconnect the machine

from the compressed air supply when the ma-

chine is not in use, before switching accesso-

ries or when performing repairs.

- Never aim the air ﬂow at yourself or others.

Hoses ﬂapping about can result in serious inju-

ries. Therefore always inspect hoses and their

fasteners for damage and a secure ﬁt.

Direct cold air away from hands.

Do not use quick-release couplings on the tool

intake of impact- and impulse drivers. Only use

connectors made from hardened steel (or ma-

terial with comparable impact resistance) on

threaded hose connections.

If using universal swivel couplings (coupling

discs) always use locking pins and use whip-

check hose safety cables for protection in the

event the connection between the hose and the

machine or in between hoses fail.

Be sure not to exceed the maximum pressure

speciﬁed on the machine.

In torque controlled machines with continuous

rotation the air pressure has a safety-related

impact on the output. Therefore hose length

and diameter requirements must be determined.

Never carry pneumatic tools by the hose.

Commissioning

Note: The device is fully functional as delivered.

Inserting the socket

wrench or bit

ATTENTION! Always insert the required bit

before connecting the device to the compressed

air system. Always disconnect the compressed

air supply from the air connection

before

inserting or changing sockets or bits.

Insert the correct socket, if necessary with ex-

tension

, in the drive.

Slide the socket spanner onto the square

the drive.

Be sure the snap ring is locked into the notch of

the socket wrench.

Only use socket key sizes speciﬁed in ﬁgure A.

Be sure the socket keys used are not damaged.

Never use damaged or the wrong size (not sui-

table) sockets keys.

Connecting

Note: only use connection hoses with a minimum

inside diameter of 9 mm.

96878_par_Druckluft-Schlagschrauber PDSS 310 A1_content_DE_AT_NL.indd 39 23.04.14 15:55

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PDSS 310 A1 - IAN 96878 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside PDSS 310 A1 - IAN 96878

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info