Bedienungsanleitung Parkside PKO 270 A5 - IAN 315462 (Seite 7 von 72) (Deutsch, Englisch, Holländisch, Dänisch, Französisch)

773324

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

3GB/IE/NI

1. Introduction

Manufacturer:

scheppach

Fabrikation von Holzbearbeitungsmaschinen GmbH

Günzburger Straße 69

D-89335 Ichenhausen

Dear Customer,

we hope your new tool brings you much enjoyment and suc-

cess.

Note:

According to the applicable product liability laws, the manu-

facturer of the device does not assume liability for damages

to the product or damages caused by the product that occurs

due to:

• Improper handling

• Non-compliance of the operating instructions

• Repairs by third parties, not by authorized service techni-

cians

• Installation and replacement of non-original spare parts

• Application other than speciﬁed

• A breakdown of the electrical system that occurs due to the

non-compliance of the electric regulations and VDE regula-

tions 0100, DIN 57113 / VDE0113

We recommend:

Read through the complete text in the operating instructions be-

fore installing and commissioning the device.

The operating instructions are intended to help the user to be-

come familiar with the machine and take advantage of its ap-

plication possibilities in accordance with the recommendations.

The operating instructions contain important information on

how to operate the machine safely, professionally and econom-

ically, how to avoid danger, costly repairs, reduce downtimes

and how to increase reliability and service life of the machine.

In addition to the safety regulations in the operating instruc-

tions, you have to meet the applicable regulations that apply

for the operation of the machine in your country.

Keep the operating instructions package with the machine at

all times and store it in a plastic cover to protect it from dirt and

moisture. Read the instruction manual each time before operat-

ing the machine and carefully follow its information.

The machine can only be operated by persons who were in-

structed concerning the operation of the machine and who are

informed about the associated dangers. The minimum age re-

quirement must be complied with.

In addition to the safety instructions contained in this operating

manual and the speciﬁc regulations of your country, the techni-

cal rules generally accepted for the operation of machines of

the same type must be observed.

We accept no liability for damage or accidents which arise

due to non-observance of these instructions and the safety

information.

2. Device description (ﬁg. 1-13)

1. Transport handle

2. Pressure switch

3. Quick-lock coupling (regulated compressed air)

4. Pressure gauge (for reading the preset vessel pressure)

5. Pressure regulator

6. Pressure gauge (for reading the vessel pressure)

7. Quick-lock coupling (unregulated compressed air)

8. Pressure vessel

9. Supporting foot

10. Drain plug for condensation water

11. Wheel

12. Oil drain plug

13. Compressor pump

14. Compressed air hose

15. Air ﬁlter

16. Oil sealing plug

17. ON/OFF switch

18. Oil level window

19. Safety valve

20. Oil ﬁller opening

21. Flange screw

22. Washer

23. Nut

24. Flange nut

25. Screw

3. Scope of delivery

• 1x Air ﬁlter

• 2x Supporting foot

• 2x Wheel

• 1x Mounting material

• 1x Oil sealing plug

• 1x Oil bottle

• 1x Compressed air hose

• 1x Translation of Original Operating Manual

4. Intended use

The compressor is designed to generate compressed air for

compressed-air driven tools which can be driven with an air

volume of up to approx. 260 l/min (e.g. tire inﬂator, blow-out

pistol and paint spray gun). Due to the limited air output it

is not possible to use the compressor to drive tools with very

high air consumption (for example orbital sanders, die grind-

ers and hammer screwdrivers).

The equipment is allowed to be used only for its prescribed

purpose. Any other use is deemed to be a case of misuse. The

user/operator and not the manufacturer will be liable for any

damage or injuries of any kind resulting from such misuse.

An element of the intended use is also the observance of the

safety instructions, as well as the assembly instructions and op-

erating information in the operating manual.

Persons who operate and maintain the machine must be fa-

miliar with the manual and must be informed about potential

dangers.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PKO 270 A5 - IAN 315462 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside PKO 270 A5 - IAN 315462

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info