Bedienungsanleitung Parkside PKO 270 A5 - IAN 315462 (Seite 8 von 72) (Deutsch, Englisch, Holländisch, Dänisch, Französisch)

773324

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

4GB/IE/NI

In addition, the applicable accident prevention regulations

must be strictly observed.

Other general occupational health and safety-related rules and

regulations must be observed.

The liability of the manufacturer and resulting damages are

excluded in the event of modiﬁcations of the machine.

Please note that our equipment has not been designed for use

in commercial, trade or industrial applications. Our warranty

will be voided if the equipment is used in commercial, trade or

industrial businesses or for equivalent purposes.

5. Safety information

m Attention! The following basic safety measures must be

observed when using electric tools for protection against elec-

tric shock, and the risk of injury and ﬁre. Read all these notices

before using the electric tool and keep the safety instructions

for later reference.

Safe work

1. Keep the work area orderly

-Disorder in the work area can lead to accidents.

2. Take environmental inﬂuences into account

-Do not expose electric tools to rain.

-Do not use electric tools in a damp or wet environment.

There is a risk of electric shock!

-Make sure that the work area is well-illuminated.

-Do not use electric tools where there is a risk of ﬁre or

explosion.

3. Protect yourself from electric shock

-Avoid physical contact with earthed parts (e.g. pipes,

radiators, electric ranges, cooling units).

4. Keep children away

-Do not allow other persons to touch the equipment or

cable, keep them away from your work area.

5. Securely store unused electric tools

-Unused electric tools should be stored in a dry, elevat-

ed or closed location out of the reach of children.

6. Do not overload your electric tool

-They work better and more safely in the speciﬁed out-

put range.

7. Wear suitable clothing

-Do not wear wide clothing or jewellery, which can be-

come entangled in moving parts.

-Rubber gloves and non-slip shoes are recommended

when working outdoors.

-Tie long hair back in a hair net.

8. Do not use the cable for purposes for which it is not in-

tended

-Do not use the cable to pull the plug out of the outlet.

Protect the cable from heat, oil and sharp edges.

9. Take care of your tools

-Keep your compressor clean in order to work well and

safely.

-Follow the maintenance instructions.

-Check the connection cable of the electric tool regu-

larly and have it replaced by a recognised specialist

when damaged.

-Check extension cables regularly and replace them

when damaged.

10. Pull the plug out of the outlet

-During non-use of the electric tool or prior to mainte-

nance and when replacing tools such as saw blades,

bits, milling heads.

11. Avoid inadvertent starting

-Make sure that the switch is switched oﬀ when plug-

ging the plug into an outlet.

12. Use extension cables for outdoors

-Only use approved and appropriately identiﬁed exten-

sion cables for use outdoors.

-Only use cable reels in the unrolled state.

13. Remain attentive

-Pay attention to what you are doing. Remain sensible

when working. Do not use the electric tool when you

are distracted.

14. Check the electric tool for potential damage

-Protective devices and other parts must be carefully in-

spected to ensure that they are fault-free and function

as intended prior to continued use of the electric tool.

-Check whether the moving parts function faultlessly

and do not jam or whether parts are damaged. All

parts must be correctly mounted and all conditions

must be fulﬁlled to ensure fault-free operation of the

electric tool.

-Damaged protective devices and parts must be prop-

erly repaired or replaced by a recognised workshop,

insofar as nothing diﬀerent is speciﬁed in the operating

manual.

-Damaged switches must be replaced at a customer

service workshop.

-Do not use any faulty or damaged connection cables.

-Do not use any electric tool on which the switch cannot

be switched on and oﬀ.

15. Have your electric tool repaired by a qualiﬁed electrician

-This electric tool conforms to the applicable safety reg-

ulations. Repairs may only be performed by an electri-

cian using original spare parts. Otherwise accidents

can occur.

16. Important!

-For your own safety you must only use the accessories

and additional units listed in the operating instructions

or recommended or speciﬁed by the manufacturer. The

use of mounted tools or accessories other than those

recommended in the operating instructions or cata-

logue may place your personal safety at risk.

17. Noise

-Wear ear muﬀs when you use the compressor.

18. Replacing the power cable

-To prevent hazards, leave the replacement of dam-

aged power cables strictly to the manufacturer or a

qualiﬁed electrician. There is a risk of electric shock!

19. Inﬂating tires

-Directly after inﬂating tires, check the pressure with a

suitable pressure gauge, for example at your ﬁlling sta-

tion.

20. Roadworthy compressors for building site operations

-Make sure that all lines and ﬁttings are suitable for the

maximum permissible operating pressure of the com-

pressor.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PKO 270 A5 - IAN 315462 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside PKO 270 A5 - IAN 315462

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info