Bedienungsanleitung Parkside POFA 12 A1 - IAN 308577 (Seite 28 von 148) (Deutsch, Englisch, Holländisch, Französisch, Polnisch)

779757

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

GB IE

-

ence of drugs, alcohol or medica-

tion. A moment of inattention white op-

erating power tools may result in serious

personal injury.

b) Use personal protective equip-

ment. Always wear eye protec-

tion. Protective equipment such as dust

mask, non-skid safety shoes, hard hat,

or hearing protection used for appro-

priate conditions will reduce personal

injuries.

c) Prevent unintentional starting.

Ensure the switch is in the off-po-

sition before connecting to power

source and/or battery pack,

picking up or carrying the tool.

Carrying power tools with your nger on

the switch or energising power tools that

have the switch on invites accidents.

d) Remove any adjusting key or

wrench before turning the power

tool on. A wrench or a key left at-

tached to a rotating part of the power

tool may result in personal injury.

e) Do not overreach. Keep proper

footing and balance at all times.

This enables better control of the power

tool in unexpected situations.

f) Dress properly. Do not wear

loose clothing or jewellery. Keep

your hair, clothing and gloves

away from moving parts. Loose

clothes, jewellery or long hair can be

caught in moving parts.

g) If devices are provided for the

connection of dust extraction and

collection facilities, ensure these

are connected and properly

used. Use of dust collection can reduce

dust-related hazards.

h) Do not allow yourself to be lulled

into a false sense of security and

do not disregard the safety rules

for power tools, even if you are

familiar with the power tool af-

ter using it many times. Careless

action can lead to serious injuries within

a fraction of a second.

4) Power tool use and care

a) Do not force the power tool. Use

the correct power tool for your

application. The correct power tool

will do the job better and safer at the

rate for which it was designed.

b) Do not use the power tool if the

switch does not turn it on and

off. Any power tool that cannot be con-

trolled with the switch is dangerous and

must be repaired.

c) Disconnect the plug from the

power source and/or the battery

pack from the power tool be-

fore making any adjust-ments,

changing accessories, or storing

power tools. Such preventive safety

measures reduce the risk of starting the

power tool accidentaIly.

d) Store idle power tools out of the

reach of children and do not al-

low persons unfamiliar with the

power tool or these instructions

to operate the power tool. Power

tools are dangerous in the hands of un-

trained users.

e) Maintain power tools. Check for

misalignment or binding of mov-

ing parts, breakage of parts and

any other condition that may af-

fect the power tool’s operation.

If damaged, have the power tool

repaired before use. Many acci-

dents are caused by poorly maintained

power tools.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside POFA 12 A1 - IAN 308577 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info