Bedienungsanleitung Parkside POFA 12 A1 - IAN 308577 (Seite 30 von 148) (Deutsch, Englisch, Holländisch, Französisch, Polnisch)

779757

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

GB IE

Materials hazardous to

health such as lead, materi-

als coated in paint containing

lead or materials containing

asbestos may not be worked

on using this device!

• Fasten and secure the workpiece

by means of clamps or with

another method on a stable un-

derground. If you hold the workpiece

only with your hand or against your own

body, it will stay instable and this can

lead to a loss of control.

• The permissible rotation speed of

the attachment tools must be at

least as high as the highest rota-

tion speed indicated on the pow-

er tool. Accessories that run faster than

the permissible speed can be destroyed.

• Cutters and other accessories

must be exactly matching the

tool holder (collet chuck) of your

power tool. Attachment tools that are

not exactly matching the tool holder of

the power tool rotate unevenly, vibrate

very strongly and can ultimately lead to

a loss of control.

• Ensure that the cutter is assem-

bled correctly. A cutter that is not as-

sembled correctly can break during the

milling or be ejected and present a risk

of injury.

• Move the power tool against the

workpiece only when it is turned

on. Otherwise, there is a risk of kick-

back if the attachment tools jam in the

workpiece.

• Do not put your hands in the

cutting area and neither on the

cutter. Hold the upper handle

or the motor housing with your

other hand. When holding the milling

cutter with both hands, they cannot be

injured by the cutter.

• Never mill over metal objects, nails

or screws. The milling cutter can be dam-

aged and lead to increased vibrations.

• Use suitable detectors in order to



the local utility company. Contact

with electrical cables can lead to electric

shock and re, contact with a gas pipe

can result in an explosion. Damage to

a water pipe can lead to property dam-

aged and electric shock.

• Do not use any blunt or damaged

tools. Blunt or damaged tools can

cause uncontrollable situations.

• Hold the power tool tightly with

both hands while working and en-

sure a secure footing. The power tool

is guided more securely with both hands.

• Wait until the power tool has

stopped before placing it down.

The attachment tools can jam and lead

to a loss of control over the power tool.

• Avoid contact with the tool or

the workpiece immediately after

processing. The parts may be hot and

cause burn injuries.

• Use only milling cutters which have the

correct shank diameter and are suitable

for the speed of the power tool.



that are not recommended by

PARKSIDE. This can result in electric

shock or re.

Residual risks

Even if properly operating and handling

this electric tool, some residual risks will

remain. Due to its construction and build,

this electric tool may present the following

hazards:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside POFA 12 A1 - IAN 308577 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info