Bedienungsanleitung Parkside POFA 12 A1 - IAN 308577 (Seite 29 von 148) (Deutsch, Englisch, Holländisch, Französisch, Polnisch)

779757

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

GB IE

f) Keep cutting tools sharp and

clean. Properly maintained cutting tools

with sharp cutting edges are less Iikely

to bind and are easier to control.

g) Use the power tool, accessories

and tool bits etc. in accordance

with these instructions, taking

into account the working condi-

tions and the work to be per-

formed. Use of the power tool for

operations different from those intended

could result in a hazardous situation.

h) Keep handles and grip surfaces

dry, clean and free from oil and

grease. Slippery handles and grip

surfaces do not permit safe operation

and control over the power tool in un-

expected situations.

5) CAREFUL HANDLING AND USE

OF BATTERY DEVICES

a) Charge the batteries only in

chargers that are recommended

by the manufacturer. Risk of re if a

charger that is suitable for a specic type

of battery is used with other batteries.

b) In the power tools, use only the

batteries designed for the pur-

pose. The use of other batteries may

result in injuries and risk of re.

c) Keep the unused battery away

from paper clips, coins, keys,

nails, screws and other small

metal objects, which could

cause bridging of the contacts.

A short circuit between the battery con-

tacts may cause burns or re.

d) If used incorrectly, liquid may

leak from the battery. Avoid

contact with this. In the event of

accidental contact, rinse off with

water. If the liquid gets into

eyes, seek medical assistance.

Leaking battery uid may cause skin

irritations or burns.

e) Do not use damaged or altered

batteries. Damaged or altered batter-

ies can be unpredictable and lead to

re, explosion or risk of injury.

 

or elevated temperatures. Fire or

temperatures over 130°C can cause

an explosion.

g) Follow all instructions for charg-

ing and never charge the bat-

tery or the battery-powered

tool outside the temperature

range stated in the operating

instructions. Incorrect charging or

charging outside the permitted tem-

perature range may destroy the battery

and increase the risk of re.

6) SERVICE

a) Have your power tool serviced

-

ing only identical replacement

parts. This will ensure that the safety

of the power tool is maintained.

b) Never repair damaged batter-

ies. All battery repairs should be car-

ried out by the manufacturer or author-

ised customer service centres only.

Safety notices for milling

cutters

Warning! Milling can result in

the formation of dusts hazardous to

health, which can pose a risk to the

operator or persons nearby.

Make sure that the workplace is

well ventilated. Always wear safety

goggles and respiratory protection.

Attach a dust extraction system.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside POFA 12 A1 - IAN 308577 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info